01 / 21

Levels in
Autodesk Revit

Master the datum elements that define every storey in your building model: how to create, modify, and constrain elements to levels.

Autodesk Revit

What Is a Level?

A Level is a finite horizontal plane that acts as a reference for level-hosted elements such as floors, ceilings, roofs, and walls. Levels are datum elements: they carry no physical geometry but establish the vertical framework of a building.

Where Levels Live

Level 1 \(0'\text{-}0''\)
Level 2 \(10'\text{-}0''\)
Level 3 \(20'\text{-}0''\)
Roof \(30'\text{-}0''\)
\(10'\text{-}0''\)
Elevation / Section View

Levels are only visible in elevation and section views. Each level line spans the full width of the view and displays its name and elevation at the bubble marker.

Why Levels Matter

★ Floor Plans
Every level automatically generates a corresponding floor plan view so you can design each storey.
★ Host Reference
Walls, floors, ceilings, and roofs attach to levels. Move the level, and the hosted elements follow.
★ Scheduling
Schedules and tags filter by level, making quantity take-offs and cost estimation storey-accurate.

Core Rule: Level-Driven Constraints

In Revit, most building elements are constrained to one or two levels. A wall, for example, has a Base Constraint (the level it starts from) and a Top Constraint (the level it reaches up to).

Level 1 (Base) Level 2 (Top) Wall
\(10'\text{-}0''\)

Single-Level vs. Multi-Level Constraints

Single-Level Multi-Level
Examples Floors, Ceilings, Furniture Walls, Columns, Curtain Walls
Constraints Hosted on one level Base Constraint + Top Constraint
Offset Offset from host level Base Offset + Top Offset
Behaviour on Level Move Element moves with its level Element stretches between two levels

Key Level Properties

Name
The display label, e.g., "Level 1", "Ground Floor", "Roof". Appears in the Project Browser and on the level head.
Elevation
The vertical height relative to the project's internal origin. You can enter it numerically in the Properties palette.
Building Story
Indicates whether this level represents a building storey. Non-storey levels (like T.O. Parapet) don't generate floor plans by default.

How to Create a Level

1
Open an Elevation or Section View. Levels cannot be created in plan views.
2
Architecture tab → Datum panel → Level. Or type LL (keyboard shortcut).
3
Click to place the start point of the level line, then click the end point. Revit draws the horizontal datum.
4
Set the elevation either by clicking at the desired height or typing a value in the Options Bar before placing.
5
Check "Make Plan View" (enabled by default) to auto-generate a floor plan for the new level.

How to Modify a Level

1
Select the level line in an elevation or section view. Blue grips appear at each end.
2
Drag the level line up or down to change its elevation. All constrained elements update in real time.
3
Or type a new elevation in the Properties palette under "Elevation". For example, change from \(10'\text{-}0''\) to \(12'\text{-}0''\).
4
Rename by clicking the level name text in the view, or via Properties. Revit will prompt to rename the corresponding views.

Example 1: Three-Storey Setup

You are starting a new residential project. The ground floor is at \(0'\text{-}0''\), the first floor at \(10'\text{-}0''\), and the second floor at \(20'\text{-}0''\). Set up the levels.

Ground Floor \(0'\text{-}0''\)
First Floor \(10'\text{-}0''\)
Second Floor \(20'\text{-}0''\)
\(10'\text{-}0''\)
\(10'\text{-}0''\)

Example 2: Adding a Non-Storey Level

The architect asks you to add a Top of Parapet reference at \(32'\text{-}0''\) above Level 1. This isn't a building storey: it just marks the top of the wall.

1
Create a new level at elevation \(32'\text{-}0''\) in the elevation view.
2
Rename it to "T.O. Parapet".
3
Uncheck "Building Story" in the Properties palette so Revit does not generate a floor plan view.
4
Use it as the Top Constraint for the parapet walls. They now stretch from the roof level to the T.O. Parapet level.

Example 3: Adjusting a Level Elevation

Midway through a project, the structural engineer increases the floor-to-floor height from \(10'\text{-}0''\) to \(12'\text{-}0''\). What happens?

BEFORE L1 L2
\(10'\)
→ AFTER L1 L2
\(12'\)

Levels vs. Reference Planes

Levels Reference Planes
Orientation Always horizontal Any orientation (H, V, angled)
Generates Plan View ✓ Yes (if Building Story) ✕ No
Hosts Elements ✓ Floors, ceilings, roofs ✕ Not directly
Appears In Elevation / Section views All views
Purpose Define storeys Alignment aids, family geometry

Copy/Monitor & Linked Levels

In multi-discipline projects, the architectural model defines levels first. Structural and MEP models use Copy/Monitor to reference those levels, ensuring coordination across linked files.

Architectural Copy/Monitor Structural Dashed = monitored levels (linked)

Common Mistakes

✕ Creating Levels in Plan View
Levels can only be placed in elevation or section views. You won't find the Level tool active in a plan view.
✕ Deleting a Level with Hosted Elements
Deleting a level removes all elements hosted on it. Always reassign elements to another level first.
✕ Using Offsets Instead of Levels
Hard-coding a wall's height via offset (e.g., "Unconnected: 10'") bypasses constraints. The wall won't update if levels change.

Summary: Level Essentials

Concept Details
What it is A horizontal datum element defining a storey
Created in Elevation or Section views only
Key properties Name, Elevation, Building Story (on/off)
Constraint types Base Constraint, Top Constraint, Offset
Auto-generates Floor Plan view (if Building Story = Yes)
Modification impact All constrained elements update automatically
Multi-discipline Use Copy/Monitor for linked model coordination

Question 1 of 5

In which type of view can you create a new Level in Revit?

Question 2 of 5

A wall has Base Constraint = Level 1 and Top Constraint = Level 2. If Level 2 is raised by \(3'\), what happens to the wall?

Question 3 of 5

What happens when you delete a level that has floors, walls, and furniture hosted on it?

Question 4 of 5

You need a reference datum at the top of a parapet, but you do not want a corresponding floor plan view. What should you do?

Question 5 of 5

Which Revit feature ensures that levels in a structural model stay coordinated with the architectural model?