Interference
Checks
Learn how to identify and resolve spatial conflicts between building elements in Autodesk Revit before they become costly construction errors.
What Is an Interference Check?
An interference check (also called clash detection) is an automated process that scans a building model to find places where two or more elements occupy the same physical space. In the real world, a steel beam cannot pass through an HVAC duct: the interference check catches that conflict on screen so you can fix it before construction begins.
Why They Matter
Key Terminology
The Core Rule of Clash Detection
How Revit Computes Intersections
Hard vs Soft Clashes
| Hard Clash | Soft Clash | |
|---|---|---|
| Definition | Two solids physically overlap | An element invades a clearance zone |
| Example | Pipe through structural beam | Equipment too close to a wall for maintenance |
| Severity | Critical: cannot build | Warning: code or access issue |
| Revit Detection | Built-in Interference Check | Requires clearance parameter or Navisworks |
| Resolution | Move, resize, or reroute one element | Adjust placement or revise clearance rule |
How to Run the Check
Selecting the Right Categories
The interference check dialog lets you pick any two Revit categories to compare. Choosing the right pairing is essential: checking everything against everything generates too much noise, while a narrow selection might miss real problems.
Example 1: Beam vs Duct
Example 2: Multi-System Conflict
Example 3: Linked Model Clashes
Reading the Report
Resolution Strategies
Common Mistakes
Clash Detection Summary
| Revit Built-In | Navisworks | |
|---|---|---|
| Clash Types | Hard clashes only | Hard, soft, and workflow |
| Linked Models | Yes (one link at a time) | Yes (multiple files) |
| Tolerance Settings | None (exact overlap) | Adjustable clearance |
| Report Export | HTML table | XML, HTML, tabular |
| Best For | Quick single-discipline checks | Full project coordination |
Question 1 of 5
What does an interference check in Revit primarily detect?
Question 2 of 5
A soft clash differs from a hard clash because it involves:
Question 3 of 5
Where do you find the Interference Check command in Revit?
Question 4 of 5
A single plumbing pipe passes through both a duct and a beam. How many clashes will the interference report show?
Question 5 of 5
Which is the best practice for when to run interference checks during a project?