01 / 21

Revit Grids
Structural Layout Essentials

Master the art of creating and modifying grid lines in Autodesk Revit: align structural elements, lock components, and build with precision.

Autodesk Revit

What Are Grids in Revit?

Grids are datum elements: non-physical reference lines that define the structural layout of a building. They appear as dashed lines on plan views and represent the column lines and structural bays that organize your design.

1 2 3 4 A B C Bay Spacing

Why Do Grids Matter?

Grids are the backbone of coordination between architects, structural engineers, and contractors. Every column, beam, and foundation references a grid intersection point.

Coordination
All disciplines reference the same grid system: everyone speaks the same spatial language.
Precision
Elements locked to grids maintain exact positions even when the model changes.
Documentation
Grid bubbles auto-appear on sheets, providing clear references in construction documents.

Anatomy of a Grid Line

A A Grid Bubble (Label) Datum Line (Dashed) End Bubble (Optional) Extent

Creating Grid Lines

1
Navigate to Architecture tab → Datum panel → Grid tool (keyboard shortcut: GR).
2
Choose the line type: Linear grid (straight) or Arc grid (curved). Most projects use linear grids.
3
Click to place start point, then click again to place end point. The grid auto-labels sequentially (1, 2, 3... or A, B, C...).
4
Use the Copy or Array command to create evenly spaced parallel grids at precise intervals.

The Align + Lock Principle

The most powerful workflow in Revit grids: Align an element to a grid, then Lock the constraint. When the grid moves, every locked element moves with it.

3 3 Before After Move Grid Moves

Grids vs Reference Planes

Grids Reference Planes
Visibility Visible on sheets with label bubbles Hidden in print by default
Purpose Structural layout coordination Modeling aids and family constraints
Labeling Auto-numbered/lettered Named manually (optional)
Scope Project-wide datum View-specific or family-internal
Locking Elements lock to grids Elements lock to ref planes

Step-by-Step: Align + Lock Workflow

1
Place your grids first. Set up the entire grid system before placing structural elements.
2
Place a column at a grid intersection. Revit may auto-snap to the intersection point.
3
Select the Align tool (AL). Click the grid line first (reference), then click the column (element to align).
4
Click the padlock icon that appears. This locks the constraint: the column will follow the grid if it ever moves.
5
Repeat for all elements. Walls, beams, and foundations can all be aligned and locked to grids.

Example 1: Simple Bay Layout

Create a grid system that forms a \( 3 \times 2 \) bay layout, using four vertical grids spaced at \( 24\prime \) and three horizontal grids spaced at \( 30\prime \).

1 2 3 4 A B C
\( 24\prime-0\prime\prime \)
\( 30\prime-0\prime\prime \)

Example 2: Modifying Grid Spacing

The architect changes the bay width from \( 24\prime \) to \( 28\prime \). With locked constraints, you simply move the grid and all columns follow automatically.

Before
\( 24\prime-0\prime\prime \)
Move Grid 2 After 1 2
\( 28\prime-0\prime\prime \)

Example 3: Grid Extents Across Views

Grid extents control how far a grid line stretches in each view. You can set extents to 2D (view-specific) or 3D (model-wide). A 3D extent change propagates to all plan views simultaneously.

Level 1 Plan A B 3D Level 2 Plan A B 3D Synced

Naming Conventions for Grids

Numbers (1, 2, 3...)
Used for grids running in the X-direction (typically left-to-right). Start from the left side of the plan.
Letters (A, B, C...)
Used for grids running in the Y-direction (typically bottom-to-top). Start from the bottom of the plan.

When you rename a grid bubble by clicking on it, Revit offers to rename all subsequent grids automatically. Be cautious: this affects the entire project.

Pinning Grids in Place

Once your grid layout is finalized, pin every grid line to prevent accidental movement. Pinned elements show a pushpin icon and cannot be moved without unpinning first.

1
Select all grids using a crossing window or by filtering with the Selection Filter (only Grids checked).
2
Click the Pin button in the Modify ribbon (shortcut: PN). A pushpin icon appears on each grid.
3
To unpin: Select the grid, then click Unpin (shortcut: UP). Only unpin when an intentional change is needed.

Controlling Grid Visibility

In large projects, not every grid should appear in every view. Revit gives you two tools to control grid visibility:

Scope Boxes
Assign grids to a Scope Box, then apply that Scope Box to specific views. Only grids within the scope appear.
Hide in View
Right-click a grid → Hide in View → Elements. Quick per-view control, but harder to manage at scale.
Crop Region
Grids outside the crop region are automatically hidden. Adjusting the crop adjusts visible grids.

Common Mistakes to Avoid

✕ Forgetting to Lock
Aligning without locking creates no constraint. The element will not follow the grid when it moves.
✕ Moving Grids While Unpinned
Accidentally dragging a grid shifts all locked elements, potentially misaligning the entire structure.
✕ 2D vs 3D Extent Confusion
Changing a 3D extent on one view changes all views. Switch to 2D mode first for view-specific edits.

Grid Operations Summary

Action Shortcut Result
Place Grid GR Creates a new datum grid line
Align AL Snaps element to grid position
Lock Click padlock icon Creates parametric constraint
Pin PN Prevents accidental grid movement
Unpin UP Allows grid to be moved again
Copy CO Duplicates grid at specified offset
Array AR Creates multiple evenly-spaced grids

Question 1 of 5

What is the keyboard shortcut for the Grid tool in Revit?

Question 2 of 5

After using the Align tool to snap a column to a grid line, what must you do to ensure the column moves with the grid?

Question 3 of 5

What happens when you change the extent of a grid line that is set to 3D mode?

Question 4 of 5

A colleague accidentally drags Grid 3, shifting all columns locked to it. What should have been done to prevent this?

Question 5 of 5

You need to add a new grid between existing Grids 2 and 3 without renaming the entire sequence. What label convention should you use?