01 / 22

Floors & Roofs
in Autodesk Revit

Learn to create and edit floor systems and roof elements using footprint and extrusion methods: the foundational building-envelope skills every Revit user needs.

Autodesk Revit

What Are Floors & Roofs?

In Revit, floors and roofs are system families: hosted, sketch-based elements that define the horizontal enclosures of a building. They share many creation techniques but serve different architectural roles.

Floor
A horizontal element that sits at a defined level, providing structural support and walkable surface.
Roof
An overhead element that caps a building, created via footprint or extrusion to define weather protection and form.

Why Floors & Roofs Matter

Floors and roofs are among the first elements placed when modeling a building. They define interior space boundaries, drive room calculations, and connect to walls, structural framing, and MEP systems.

1
Room boundaries: Floors and roofs automatically bound rooms and spaces for area schedules.
2
Structural hosting: They host structural layers and can connect to analytical models.
3
Schedule extraction: Material quantities, areas, and costs are automatically computed from floor/roof geometry.

Two Creation Methods: Footprint vs Extrusion

Revit provides two distinct approaches for creating floors and roofs. Choosing the right one depends on the geometry you need.

Footprint
Draw a closed boundary (sketch) in plan view. The element extends vertically based on its type properties. Best for standard flat or sloped shapes.
Extrusion
Draw a profile in an elevation or section view and extrude it along a direction. Ideal for barrel vaults, curved roofs, and complex cross-sections.

The Footprint Workflow

1. Select Tool Architecture tab 2. Sketch Boundary Closed loop 3. Set Properties Slope, offset 4. Finish Green check PLAN VIEW Sketch Boundary Width

The Extrusion Workflow

SECTION / ELEVATION Profile Sketch Extrude 3D RESULT Start: 0' 0" End: 30' 0" Extrusion Start & End define depth

Footprint vs Extrusion: When to Use Each

Footprint Extrusion
Sketch View Plan view Elevation / Section
Best For Flat or uniformly sloped Curved / complex profiles
Slope Control Slope arrow or edge slope Inherent in profile shape
Roof Example Hip roof, gable roof Barrel vault, wave roof
Floor Example Standard slab, ramp slab Shaped subfloor profile
Complexity Simple Moderate

Floor Type Properties & Layers

Finish: Tile / Hardwood Substrate: Mortar Bed Structure: Concrete Slab Membrane: Vapor Barrier 12 mm 20 mm 200 mm 2 mm Total 234 mm Edit Assembly: Layer Structure Type Properties → Structure → Edit

Roof by Footprint: Defining Slope

4:12 4:12 Slope-defining edges (check "Defines Slope") SECTION RESULT Ridge Eave Eave 4:12

Step-by-Step: Creating a Floor

1
Open a plan view at the level where you want the floor (e.g., Level 1).
2
Architecture tab → Floor → Floor: Architectural (or Structural for load-bearing slabs).
3
Select a floor type from the Type Selector (e.g., "Generic 300mm").
4
Sketch the boundary using Lines, Pick Walls, or Pick Lines. Ensure a closed loop.
5
Set level offset if needed (Height Offset from Level in Properties).
6
Click the green checkmark (Finish Edit Mode) to complete the floor.

Step-by-Step: Roof by Footprint

1
Open a plan view at the level where the roof base sits (e.g., Level 2 or Top of Wall).
2
Architecture tab → Roof → Roof by Footprint.
3
Pick Walls or draw lines to define the boundary. Check "Defines Slope" for edges that create the pitch.
4
Set overhang distance in the Options Bar (e.g., 600 mm beyond walls).
5
Adjust slope per edge: select the edge, set slope value in the Options Bar.
6
Finish Edit Mode and confirm wall attachment if prompted.

Example 1: Rectangular Floor Slab

12,000 mm 8,000 mm Level 1 Floor Generic 300mm Concrete

Example 2: L-Shaped Floor with Opening

Opening 10,000 mm 8,000 mm Key Steps 1. Sketch L-shape 2. Add opening loop 3. Verify two loops 4. Finish sketch Outer loop = boundary Inner loop = opening

Example 3: Hip Roof by Footprint

PLAN: All edges define slope Ridge 3D RESULT: Hip Roof All 4 edges: Defines Slope ✓ Slope: 6:12 on each edge Result: 4 sloping faces Hip ridges meet at corners

Editing Floors & Roofs After Creation

Edit Boundary
Select the element → Edit Boundary (Modify tab). Re-enter sketch mode to move, add, or remove boundary lines.
Shape Editing
Add points and split edges on the floor surface to create custom slopes, drainage patterns, or depressions.
Sub-Elements
Modify Floor/Roof → Add/Remove points. Drag sub-element points to sculpt the top surface without changing the boundary.

Common Mistakes to Avoid

✕ Open Sketch Loop
Leaving a gap in the boundary sketch. Revit cannot create a floor or roof from an open loop: always close every line segment.
✕ Wrong Level
Creating a floor at Level 2 instead of Level 1. Always verify the active level before entering sketch mode.
✕ Missing Slope Check
Forgetting to check "Defines Slope" on roof edges, resulting in a flat roof when you intended a pitched one.
✕ Overlapping Sketches
Drawing boundary lines that cross each other. Revit will reject self-intersecting loops or produce unexpected geometry.

Summary: Floors vs Roofs at a Glance

Floor Roof
Category Floors Roofs
Creation Methods Footprint only Footprint or Extrusion
Slope Shape editing / slope arrow "Defines Slope" per edge
Overhang Not typical Set in Options Bar
Openings Inner loop in sketch Inner loop or Dormer tool
Shape Editing Yes Yes
Attach to Walls No Yes (Attach Top/Base)

Question 1 of 5

Which creation method requires you to draw a profile in an elevation or section view and then specify start and end distances?

Question 2 of 5

When creating a floor, you must ensure the sketch lines form a:

Question 3 of 5

To create a hip roof by footprint, how many boundary edges should have "Defines Slope" checked?

Question 4 of 5

How do you create an opening (e.g., for a stairwell) inside a floor element?

Question 5 of 5

Which Revit feature lets you add points to a floor's top surface to create custom drainage slopes without changing the boundary?