01 / 22

Doors & Windows
in Autodesk Revit

Learn to place, modify, and control door and window families using type parameters and instance parameters for precise building models.

Autodesk Revit

What Are Doors & Windows in Revit?

In Revit, doors and windows are hosted families: they live inside a wall and automatically cut an opening when placed. Unlike standalone objects, they depend on a host wall to exist.

Family
A reusable template (e.g., "Single-Flush Door") that defines the geometry and behavior.
Instance
Each individual placement of a family in the model, with its own position and instance parameters.
Host
The wall that contains the door or window. Deleting the host removes the element.

The Family Hierarchy

Category Family Type Instance e.g., "Doors" e.g., "Single-Flush" e.g., 36" x 84" Each placed element

Why Doors & Windows Matter

Every building model needs accurate openings. Doors and windows drive schedules, area calculations, egress analysis, and construction documents. Getting them right early saves hours of rework.

Schedules
Door and window schedules auto-populate from model data: sizes, marks, hardware sets.
Tags & Annotations
Tags read parameter values directly, so correct parameters mean correct drawings.
Coordination
Structural and MEP teams depend on accurate opening sizes and locations.

Type vs Instance Parameters

Type Parameters Width Height Material Frame Type Construction Type 36" 84" Oak Wood Interior Shared by ALL instances Instance Parameters Sill Height Head Height Level Mark Comments 3' - 0" 7' - 0" Level 1 W-101 "South facade" Unique to EACH placement

Doors vs Windows: Key Differences

Property Doors Windows
Category Doors Windows
Opening starts at Floor level (base of wall) Sill height above floor
Key instance param Head Height Sill Height
Swing / Operation Swing direction indicator Operation type (fixed, casement...)
Placement workflow Click wall → set position Click wall → set sill height
Common families Single-Flush, Double, Sliding Fixed, Casement, Double-Hung

Placing a Door: Step by Step

1
Architecture tab → Door tool. Or type DR as a keyboard shortcut.
2
Select family and type from the Type Selector dropdown in the Properties palette.
3
Hover over a wall in plan view. A preview shows the door with its swing arc.
4
Click to place. Use the spacebar to flip the swing direction before clicking.
5
Adjust position using temporary dimensions or the Move tool after placement.

Placing a Window: Step by Step

1
Architecture tab → Window tool. Or type WN for the keyboard shortcut.
2
Choose the window type from the Type Selector. Check Sill Height in Properties.
3
Hover over a wall and click to place. The window cuts an opening at the defined sill height.
4
After placement, select the window and modify its Sill Height instance parameter as needed.

Door in Plan View: Anatomy

WALL Width (Type) Hinge Swing Arc Door Leaf Opening in Wall Flip Controls Spacebar: swing side Cursor position: hinge side

Window in Section View

Floor Sill Height (Instance) Height (Type) Head Height (Instance) Wall Glass

Modifying Type Parameters

1
Select the element (door or window) in any view.
2
In the Properties palette, click Edit Type to open the Type Properties dialog.
3
To change an existing type: modify the values directly. This updates all instances of that type.
4
To create a new type: click Duplicate, give it a name (e.g., "42 x 84"), then modify values.

Modifying Instance Parameters

Instance parameters appear in the Properties palette whenever you select an individual element. No "Edit Type" button needed: just change the value directly.

Sill Height
Distance from the floor to the bottom of a window. Each window can have a unique sill height.
Mark
A unique identifier (e.g., "D-101") for schedules and tags. Each placement gets its own mark.
Comments
Free-text notes for coordination. Only visible in schedules and properties, not in views.

Example 1: Place a Single-Flush Door

NORTH WALL SOUTH WALL 5' - 0" from wall 36" door 1 Select type 2 Click wall 3 Align dims

Example 2: Adjust Sill Height

Before 2' - 0" Floor Change Sill After 3' - 6" Floor

Example 3: Duplicate a Door Type

You need a 42" x 84" door, but only a 36" x 84" exists in the project. Instead of editing the existing type (which would resize every 36" door), you create a new type.

1
Select any 36" x 84" door instance in the model.
2
Click Edit Type in the Properties palette to open Type Properties.
3
Click Duplicate and name the new type "42 x 84".
4
Change the Width parameter from 36" to 42". Click OK.
5
The selected door now uses the new 42" type. All other doors remain 36".

Common Mistakes to Avoid

✕ Editing Type Without Duplicating
Changing a type parameter resizes every instance of that type. Always Duplicate first if you need a new size.
✕ Placing on Wrong Host
Doors and windows must be placed on a wall. Placing on a curtain wall or mass face requires special families.
✕ Ignoring Flip Controls
Forgetting to flip the swing or hand before placing leads to rework. Use the spacebar and adjust cursor position during placement.

Summary: Parameters at a Glance

Parameter Type or Instance? Applies to
Width Type All instances of that type
Height Type All instances of that type
Material / Finish Type All instances of that type
Sill Height Instance One specific element
Head Height Instance One specific element
Mark Instance One specific element
Level Instance One specific element
Comments Instance One specific element

Question 1 of 5

In Revit, doors and windows are classified as which type of family?

Question 2 of 5

Which of the following is a type parameter for a window?

Question 3 of 5

You need a 48" wide door, but only a 36" type exists. What is the correct workflow?

Question 4 of 5

During door placement, what does pressing the spacebar do?

Question 5 of 5

What happens if you delete a host wall that contains doors and windows?