Creating Views
in Autodesk Revit
Learn how to create and manage plan, elevation, section, and 3D views to communicate your building design from every angle.
Autodesk Revit
What Is a View?
In Revit, a view is a specific representation of your 3D building model. Every time you open a floor plan, look at an elevation, or cut a section through a wall, you are working inside a view. Views do not duplicate the model: they are live windows into the same underlying data.
Why Views Matter
★ Communication
Construction documents require plan, elevation, and section views to convey design intent to builders.
★ Coordination
Different disciplines (structural, MEP, architectural) each need specialized views of the same model.
★ Documentation
Views are placed onto sheets for printing, permitting, and client presentations.
The Four Core View Types
Plan Views: The Horizontal Cut
Elevations vs. Sections
Elevation View
Shows the exterior face of a building from one direction (North, South, East, West). No cutting: you see the outside surface, windows, doors, and roof profile.
Section View
Cuts vertically through the model, revealing internal structure: wall layers, floor thicknesses, ceiling heights, and stair details hidden inside.
3D Views: Perspective and Orthographic
The Project Browser: View Hierarchy
Creating a Floor Plan View
1
Go to the View tab on the Ribbon, then click Plan Views in the Create panel.
2
Choose Floor Plan (or Ceiling Plan, Structural Plan) from the dropdown menu.
3
Select the Level for which you want a new plan view in the dialog box (only levels without existing plans are shown by default).
4
Click OK: Revit creates the view and opens it. It now appears in the Project Browser under Floor Plans.
Creating Elevation Views
1
Open a plan view where you want to place the elevation marker.
2
View tab → Elevation tool (in the Create panel). Your cursor becomes a placement tool.
3
Click in the plan view near the face of the building you want to see. The arrow on the marker points toward the viewing direction.
4
Double-click the arrowhead on the elevation marker to open the new elevation view. Adjust crop region and far clip offset as needed.
Creating Section Views
1
Open a plan or elevation view where you want to draw the section line.
2
View tab → Section tool. Click to start the section line, then click again to end it.
3
Adjust the section line by dragging the blue grips to reposition or change the cut direction (flip arrows if the view direction is wrong).
4
Double-click the section head to open the view. The far clip and crop region can be adjusted in the Properties panel.
Creating 3D Views
Default 3D View
Click the house icon on the Quick Access Toolbar (or press the 3D View button on the View tab). This creates an orthographic 3D view you can orbit with the ViewCube.
Camera (Perspective)
View tab → 3D View → Camera. Click to place the camera location, then click to set the target. This creates a perspective view simulating a human eye.
Key View Properties
View Scale
Controls the ratio between model size and paper size (e.g., 1:100). Affects text/annotation sizes.
Detail Level
Coarse, Medium, Fine: determines how much geometry detail is displayed in the view.
Crop Region
A rectangular boundary that limits what part of the model is visible. Toggle on/off in the View Control Bar.
View Range
In plan views: defines Cut Plane, Top, and Bottom heights that control what elements appear.
Understanding View Range
Common Mistakes
✕ Deleting a View Marker
Deleting an elevation or section marker in a plan view also deletes the associated view from the project. Use "Hide in View" instead.
✕ Wrong View Range
If a window or low wall is invisible in a plan, the cut plane may be above or below it. Adjust View Range in Properties to fix missing elements.
✕ Editing in the Wrong View
Model changes made in any view affect the entire model. Accidentally moving a wall in a 3D view changes it in every plan and section.
View Type Comparison
| Property | Plan | Elevation | Section | 3D |
|---|---|---|---|---|
| Cut Direction | Horizontal | None | Vertical | Optional (box) |
| Shows Interior | Yes | Yes (Interior Elev.) | Yes | Yes |
| Created From | View tab → Level | Marker in plan | Line in plan | View tab / QAT |
| Typical Use | Layout, dimensions | Exterior/Interior faces | Wall details | Presentation |
| Placed on Sheets | ✓ | ✓ | ✓ | ✓ |
Question 1 of 5
What does a floor plan view show in Revit?
A floor plan is generated by cutting the model horizontally at the cut plane height (typically 4'-0" above the associated level), then looking downward to show walls, doors, and room layouts.
Question 2 of 5
Where do you place an elevation marker to create a new elevation view?
Elevation markers are placed in a plan view. You use the Elevation tool from the View tab, then click in the plan view near the building face. The arrow on the marker shows the viewing direction.
Question 3 of 5
What happens if you delete a section marker from a plan view?
Deleting a section or elevation marker permanently removes the associated view and all annotations in it. If you only want to hide the marker symbol, use "Hide in View" instead of Delete.
Question 4 of 5
Which View Range parameter controls where walls and columns appear as thick solid cut lines in a floor plan?
The Cut Plane is the horizontal slice height. Elements that cross this plane are "cut" and shown with thick solid lines. Elements above it (but below the Top) appear as thinner projection lines.
Question 5 of 5
How do you create a perspective 3D view in Revit?
The Camera tool (View tab → 3D View → Camera) creates a perspective view. You click once to set the camera position and again to set the target point. The house icon creates a default orthographic 3D view, not a perspective.