Creating
Family Types
Learn how to create parametric family types in Autodesk Revit and test flexing behavior to ensure your components adapt correctly across your projects.
What Is a Revit Family?
In Revit, a family is the fundamental building block of every model. Every element you place: a door, a window, a column, a piece of furniture: is an instance of a family. Families contain the geometry, parameters, and behavior rules that control how a component looks and acts.
Family, Type, and Instance
Why Create Family Types?
Parametric Geometry Basics
Revit families are parametric: their geometry is driven by named dimensions (parameters) rather than hard-coded numbers. When you change a parameter value, the geometry updates automatically according to the constraints you defined.
The Core Rule of Family Types
Parameter Categories
System vs Loadable Families
| System Family | Loadable Family | |
|---|---|---|
| Stored in | Project template (.rte) | External file (.rfa) |
| Examples | Walls, Floors, Roofs | Doors, Windows, Furniture |
| Editing | Duplicate + modify in project | Family Editor (separate environment) |
| Sharing | Transfer Project Standards | Load into any project |
| Types | Created within project | Created in Family Editor, loaded with .rfa |
How to Create Family Types
Example 1: Simple Box Family
Let's create a generic model family with three types: Small, Medium, and Large. Each type differs only in Width and Depth.
Example 2: Formulas in Types
Formulas let one parameter drive others automatically. For example, a shelf family where Shelf Spacing depends on Total Height and Number of Shelves:
Example 3: Visibility Controls
Some types need to show or hide specific geometry. A Yes/No type parameter can toggle visibility of sub-components.
What Is Flexing?
Flexing is the process of systematically changing parameter values in the Family Editor to verify that geometry behaves correctly across all intended sizes. It is the primary quality-assurance step for parametric families.
The Flexing Workflow
Common Mistakes
Summary Table
| Concept | Key Detail | |
|---|---|---|
| Family | The .rfa file | Holds geometry, parameters, and rules |
| Type | Preset of values | Named row in Family Types dialog |
| Instance | Placed element | One occurrence in the project model |
| Type Parameter | Shared by all instances of a type | Width, Height, Material |
| Instance Parameter | Unique to each placed element | Sill Height, Mark, Phase |
| Flexing | Quality assurance | Switch types + Apply to verify geometry |
| Formulas | Auto-calculation | One parameter drives another |
Question 1 of 5
In Revit, a Family Type is best described as:
Question 2 of 5
Which action is essential before loading a custom family into a project?
Question 3 of 5
A shelf family has the formula: \( \text{Spacing} = \frac{\text{Height}}{\text{Shelves} + 1} \). If Height = 1800 mm and Shelves = 5, what is the Spacing?
Question 4 of 5
You want the Sill Height of a window to vary independently for each placed window. What kind of parameter should it be?
Question 5 of 5
A door family's geometry is not updating when you switch types. What is the most likely cause?