01 / 21

Rotational Equilibrium
and Newton's First Law

Master the conditions for rotational equilibrium and discover how Newton's First Law extends to rotating systems through torque analysis.

AP Physics C: Mechanics

What is Torque?

Torque is the rotational analogue of force. Just as a net force causes translational acceleration, a net torque causes angular acceleration. Torque measures how effectively a force causes an object to rotate about a specific axis.

Pivot \(r\) \(F\) \(\theta\) \(\tau\)

Sign Convention and Direction

By the right-hand rule, torque has a direction perpendicular to the plane of rotation. For 2D problems, we assign signs based on the direction of rotation about the chosen axis.

+ Counterclockwise (CCW)
Torques that tend to rotate the object counterclockwise are positive by convention.
− Clockwise (CW)
Torques that tend to rotate the object clockwise are negative by convention.

Newton's First Law: Rotational Form

Newton's First Law states that an object at rest stays at rest, and an object in motion stays in uniform motion, unless acted upon by a net external force. The rotational analogue extends this to angular motion.

Two Conditions for Static Equilibrium

For a rigid body to be in complete static equilibrium, both translational and rotational conditions must be satisfied simultaneously.

1st Condition
Translational: \(\sum \vec{F} = 0\). The net external force is zero, so the center of mass does not accelerate.
2nd Condition
Rotational: \(\sum \vec{\tau} = 0\). The net external torque about any axis is zero, so the body does not angularly accelerate.

The Equilibrium Equations

Pivot \(F_1\) \(r_1\) \(F_2\) \(r_2\) \(N\) CCW (+) CW (−)
1
\(\sum F_x = 0\): All horizontal forces balance.
2
\(\sum F_y = 0\): All vertical forces balance, so \(N = F_1 + F_2\).
3
\(\sum \tau = 0\): About the pivot: \(+F_1 r_1 - F_2 r_2 = 0\).

Translational vs Rotational Equilibrium

These two conditions are independent. An object can satisfy one without the other. Only when both hold is the object in complete static equilibrium.

Translational Rotational
Condition \(\sum \vec{F} = 0\) \(\sum \vec{\tau} = 0\)
Result if violated Linear acceleration \(\vec{a}\) Angular acceleration \(\alpha\)
Newton's Law \(\vec{F}_{\text{net}} = m\vec{a}\) \(\tau_{\text{net}} = I\alpha\)
Example of isolated case Object on frictionless surface: no net force, but could spin Spinning wheel at constant \(\omega\): no net torque, but could translate

Choosing the Right Pivot

When \(\sum \vec{F} = 0\), the torque sum is the same about any axis. So you can choose a pivot that eliminates unknowns from the torque equation, simplifying the algebra.

1
Identify all forces and draw a complete free-body diagram with distances.
2
Choose a pivot where an unknown force acts. That force produces zero torque (\(r = 0\)).
3
Write \(\sum \tau = 0\) with correct signs (CCW = +, CW = −).
4
Solve for the unknown, then use \(\sum F_x = 0\) and \(\sum F_y = 0\) for remaining unknowns.

Step-by-Step Problem-Solving

1
Sketch the system and label all forces, distances, and angles. Include the weight at the center of mass.
2
Choose a coordinate system and sign convention for torques (CCW = + is standard).
3
Select a pivot point strategically to eliminate at least one unknown from \(\sum \tau = 0\).
4
Apply the equilibrium conditions: \(\sum F_x = 0\), \(\sum F_y = 0\), and \(\sum \tau = 0\).
5
Solve the system of equations. Verify: does each answer have correct sign, units, and physical plausibility?

Example 1: Achieving Equilibrium

A uniform beam of mass \(m = 10\,\text{kg}\) and length \(L = 4\,\text{m}\) is supported by a pivot at its left end. A block of mass \(M = 5\,\text{kg}\) hangs from the right end. What upward vertical force \(F_{up}\) must be applied at the right end to keep the beam horizontal? Also find the support force \(N\) at the pivot.

A (Pivot) mg = 98 N \(L/2 = 2\) m Mg = 49 N \(L = 4\) m \(N\) \(F_{up}\) 2 m 2 m

Example 2: Two Supports

A uniform plank of weight \(W = 200\,\text{N}\) and length \(L = 6\,\text{m}\) rests on supports at \(x = 1\,\text{m}\) (point A) and \(x = 5\,\text{m}\) (point B). Find the normal forces \(N_A\) and \(N_B\).

A (1 m) \(N_A\) B (5 m) \(N_B\) W = 200 N 3 m (center) 1 m 2 m 2 m 1 m

Example 3: Ladder Against a Wall

A uniform ladder of weight \(W = 150\,\text{N}\) and length \(L\) leans at angle \(\theta = 60^\circ\) against a frictionless wall. The floor is rough. Find the wall's normal force and the friction at the floor.

Wall \(60^\circ\) \(W\) \(N_w\) \(N_f\) \(f\) \(L/2\)

Newton's Second Law: Rotational Form

When the net torque is not zero, the body undergoes angular acceleration. This is Newton's Second Law in rotational form, and it generalizes the First Law we've been studying.

Translational
\(\sum F = ma\)
Force produces linear acceleration. Mass resists it.
Rotational
\(\sum \tau = I\alpha\)
Torque produces angular acceleration. Moment of inertia resists it.

Why Any Pivot Works

A common question: if torque depends on the pivot, how can the equilibrium condition hold about every point? The answer is elegant and important.

1
Start with two pivots: let \(\sum \tau_A = 0\) about point A. Consider a new pivot B a distance \(\vec{d}\) away.
2
Each torque shifts by \(\vec{d} \times \vec{F}_i\), so \(\sum \tau_B = \sum \tau_A + \vec{d} \times \sum \vec{F}\).
3
If \(\sum \vec{F} = 0\), the extra term vanishes: \(\sum \tau_B = \sum \tau_A = 0\). Any pivot gives the same result.

Common Mistakes to Avoid

✕ Forgetting the lever arm angle
Using \(\tau = rF\) instead of \(\tau = rF\sin\theta\). Only the perpendicular component of force creates torque.
✕ Wrong sign convention
Mixing CW and CCW signs mid-problem. Pick one convention and apply it consistently to every torque.
✕ Omitting the beam's weight
Forgetting that a uniform beam has weight \(mg\) acting at its center of mass (geometric center for uniform objects).

Summary of Key Concepts

Concept Translational Rotational
Cause of acceleration Force \(\vec{F}\) Torque \(\vec{\tau}\)
Inertia Mass \(m\) Moment of inertia \(I\)
Newton's 1st Law \(\sum F = 0 \Rightarrow \vec{v} = \text{const}\) \(\sum \tau = 0 \Rightarrow \omega = \text{const}\)
Newton's 2nd Law \(\sum F = ma\) \(\sum \tau = I\alpha\)
Equilibrium \(\sum F = 0, \; a = 0\) \(\sum \tau = 0, \; \alpha = 0\)
Kinematic variable Position \(x\), velocity \(v\) Angle \(\theta\), angular velocity \(\omega\)

Question 1 of 5

A force of 20 N is applied perpendicularly to a wrench at a distance of 0.3 m from the bolt. What is the magnitude of the torque about the bolt?

Question 2 of 5

A uniform beam of length \(L\) and weight \(W\) is supported at its left end. A weight \(2W\) hangs from its right end. What is the total torque about the left support, and what upward force must the support exert?

Question 3 of 5

A disk is spinning at constant angular velocity. Which statement about the net torque on the disk is correct?

Question 4 of 5

A ladder leans against a frictionless wall at angle \(\theta\). Increasing \(\theta\) (making the ladder more vertical) will:

Question 5 of 5

For a rigid body in static equilibrium with \(\sum \vec{F} = 0\), you compute \(\sum \tau = 0\) about point P and get a certain result. If you instead compute torques about a different point Q, you will find: