01 / 21

Simple Circuits
\( V = IR \) and Beyond

Master the fundamentals of Ohm's Law, series and parallel resistor networks, and Kirchhoff's rules for analyzing DC circuits.

AP Physics C: E&M

What Is a Circuit?

A circuit is a closed loop through which electric charge can flow continuously. Every circuit requires at least three ingredients: a source of electromotive force (EMF), a conducting path, and a load that converts electrical energy into another form.

EMF R (Load) \( I \) Conducting path (wire)

Key Quantities in Circuits

Voltage \( V \)
Electric potential difference measured in volts (V). It is the energy per unit charge: \( V = \frac{W}{q} \).
Current \( I \)
Rate of charge flow measured in amperes (A): \( I = \frac{dq}{dt} \).
Resistance \( R \)
Opposition to current flow measured in ohms (\( \Omega \)): \( R = \frac{\rho L}{A} \).

Why Simple Circuits Matter

Every electronic device: from your phone to a spacecraft: is built on the principles of simple DC circuits. Understanding Ohm's Law and Kirchhoff's rules gives you the tools to analyze any network, no matter how complex.

1
Foundation for E&M: All electromagnetic theory rests on charge flow in circuits.
2
AP Exam staple: Series/parallel analysis appears on nearly every AP Physics C: E&M exam.
3
Real-world design: Engineers use these rules to design power grids, circuit boards, and sensors.

Ohm's Law: The Core Equation

$$ V = IR $$

The voltage drop \( V \) across a resistor equals the product of the current \( I \) through it and its resistance \( R \). This can be rearranged:

Solve for \( V \)
\( V = IR \)
Solve for \( I \)
\( I = \dfrac{V}{R} \)
Solve for \( R \)
\( R = \dfrac{V}{I} \)

Kirchhoff's Two Rules

Junction Rule (KCL)
The sum of currents entering any junction equals the sum leaving: $$ \sum I_{\text{in}} = \sum I_{\text{out}} $$ This is conservation of charge.
Loop Rule (KVL)
The sum of all voltage changes around any closed loop is zero: $$ \sum \Delta V = 0 $$ This is conservation of energy.
J \( I_1 \) \( I_2 \) \( I_3 \) \( I_1 + I_2 = I_3 \)

Series vs Parallel Resistors

Series Parallel
Current Same through all Splits among branches
Voltage Splits among resistors Same across all
\( R_{\text{eq}} \) \( R_1 + R_2 + \cdots \) \( \left(\dfrac{1}{R_1} + \dfrac{1}{R_2} + \cdots\right)^{-1} \)
Effect \( R_{\text{eq}} \) increases \( R_{\text{eq}} \) decreases

Resistors in Series

\(\varepsilon\) \( R_1 \) \( R_2 \) \( R_3 \) \( I \) \( R_{\text{eq}} = R_1 + R_2 + R_3 \)

Resistors in Parallel

\(\varepsilon\) \( R_1 \) \( R_2 \) \( R_3 \) \( \frac{1}{R_{\text{eq}}} = \frac{1}{R_1} + \frac{1}{R_2} + \frac{1}{R_3} \)

How to Analyze a Circuit

1
Identify configuration: Determine which resistors are in series and which are in parallel.
2
Simplify step by step: Combine parallel groups first (reciprocal sum), then add series segments.
3
Find total current: Apply Ohm's Law: \( I_{\text{total}} = \dfrac{\varepsilon}{R_{\text{eq}}} \).
4
Work backwards: Use \( V = IR \) to find the voltage drop and current through each individual resistor.
5
Verify: Check that voltage drops around any loop sum to zero (KVL) and currents at junctions balance (KCL).

Example 1: Series Circuit

A \( 12\,\text{V} \) battery is connected to two resistors in series: \( R_1 = 4\,\Omega \) and \( R_2 = 8\,\Omega \). Find the current and the voltage across each resistor.

\( 12\,\text{V} \) \( 4\,\Omega \) \( 8\,\Omega \) \( I \)

Example 2: Parallel Circuit

A \( 24\,\text{V} \) battery connects to \( R_1 = 6\,\Omega \) and \( R_2 = 12\,\Omega \) in parallel. Find \( R_{\text{eq}} \), the total current, and each branch current.

Example 3: Combination Circuit

A \( 18\,\text{V} \) battery connects to \( R_1 = 3\,\Omega \) in series with a parallel pair: \( R_2 = 6\,\Omega \) and \( R_3 = 6\,\Omega \).

\( 18\,\text{V} \) \( 3\,\Omega \) \( 6\,\Omega \) \( 6\,\Omega \)

Power Dissipation

Every resistor converts electrical energy into heat. The power dissipated can be calculated three equivalent ways:

\( P = IV \)
Use when you know both current and voltage across the resistor.
\( P = I^2 R \)
Use when you know current and resistance (common in series).
\( P = \dfrac{V^2}{R} \)
Use when you know voltage and resistance (common in parallel).

Common Mistakes

✕ Adding parallel R directly
Students write \( R_{\text{eq}} = R_1 + R_2 \) for parallel resistors. You must use the reciprocal formula.
✕ Same V in series
Assuming voltage is the same across series resistors. In series, current is the same; voltage splits.
✕ Forgetting internal resistance
Real batteries have internal resistance \( r \). The terminal voltage is \( V = \varepsilon - Ir \), not just \( \varepsilon \).

Summary of Key Formulas

Concept Formula Key Insight
Ohm's Law \( V = IR \) Relates all three quantities
Series \( R_{\text{eq}} \) \( R_1 + R_2 + \cdots \) Resistance increases
Parallel \( R_{\text{eq}} \) \( \left(\frac{1}{R_1} + \frac{1}{R_2} + \cdots\right)^{-1} \) Resistance decreases
KCL (Junction) \( \sum I_{\text{in}} = \sum I_{\text{out}} \) Charge conservation
KVL (Loop) \( \sum \Delta V = 0 \) Energy conservation
Power \( P = IV = I^2R = \frac{V^2}{R} \) Three equivalent forms

Question 1 of 5

Two resistors, \( R_1 = 10\,\Omega \) and \( R_2 = 10\,\Omega \), are connected in parallel. What is the equivalent resistance?

Question 2 of 5

A \( 9\,\text{V} \) battery drives \( 3\,\text{A} \) through a single resistor. What is the power dissipated by the resistor?

Question 3 of 5

In a series circuit with three resistors and a \( 12\,\text{V} \) battery, the voltage drops are \( 3\,\text{V} \), \( 5\,\text{V} \), and \( V_3 \). What is \( V_3 \)?

Question 4 of 5

Three \( 12\,\Omega \) resistors are connected in parallel to a \( 12\,\text{V} \) battery. What is the total current drawn from the battery?

Question 5 of 5

A battery with EMF \( \varepsilon = 10\,\text{V} \) and internal resistance \( r = 1\,\Omega \) is connected to a \( 4\,\Omega \) external resistor. What is the terminal voltage of the battery?