01 / 21

Magnetic Flux
\( \Phi_B \) Through Surfaces

Understand how magnetic field lines thread through surfaces, master the dot product formulation, and apply flux to Faraday's Law.

AP Physics C: E&M

What Is Magnetic Flux?

Magnetic flux \( \Phi_B \) measures how much magnetic field passes through a surface. Think of it as counting the number of field lines that penetrate a given area: the more lines threading through, the greater the flux.

Flux depends on three factors: the strength of the magnetic field, the area of the surface, and the angle between the field and the surface normal.

Visualizing Field Lines Through a Surface

\( \hat{n} \)
\( \theta \)
\( \vec{B} \)
Surface A
\( \theta \) = angle between
\( \vec{B} \) and \( \hat{n} \)

Why Magnetic Flux Matters

Faraday's Law
A changing magnetic flux through a circuit induces an EMF: \( \mathcal{E} = -\frac{d\Phi_B}{dt} \)
Gauss's Law for B
The total magnetic flux through any closed surface is always zero: \( \oint \vec{B} \cdot d\vec{A} = 0 \)
Inductance
Self-inductance \( L \) relates flux linkage to current: \( N\Phi_B = LI \), the basis of inductors and transformers.

The Flux Equation

$$ \Phi_B = \vec{B} \cdot \vec{A} = BA\cos\theta $$

\( \vec{B} \)
Magnetic field vector (T)
\( \vec{A} \)
Area vector: magnitude \( A \), direction \( \hat{n} \)
\( \theta \)
Angle between \( \vec{B} \) and \( \hat{n} \)

Integral Form: \( \Phi_B = \int \vec{B} \cdot d\vec{A} \)

\( d\vec{A} \)
\( d\vec{A} \)
\( d\vec{A} \)
\( \vec{B} \)
Curved surface S

When the field varies across the surface, we chop the surface into infinitesimal patches \( d\vec{A} \), compute \( \vec{B} \cdot d\vec{A} \) for each, and sum (integrate) over the entire surface.

Flux vs. Field: Key Distinction

Magnetic Flux \( \Phi_B \) Magnetic Field \( \vec{B} \)
Type Scalar Vector
SI Unit Wb (weber) T (tesla)
Depends on B, area, and angle Source current/magnet
Meaning "How much B threads an area" "Force per unit moving charge"
Can be zero when \( \theta = 90^\circ \) (B parallel to surface) No sources nearby

The Role of the Angle \( \theta \)

\( \theta = 0^\circ \)
\( \Phi_B = BA \) (max)
\( \theta = 45^\circ \)
\( \Phi_B = BA \cos 45^\circ \)
\( \theta = 90^\circ \)
\( \Phi_B = 0 \) (zero)
\( \hat{n} \)
\( \hat{n} \)
\( \hat{n} \)

How to Calculate Magnetic Flux

1
Identify the surface. Determine its shape, area \( A \), and orient the normal vector \( \hat{n} \).
2
Determine \( \vec{B} \). Is the field uniform or non-uniform over the surface? Note its direction.
3
Find the angle \( \theta \). Measure the angle between \( \vec{B} \) and \( \hat{n} \), not between \( \vec{B} \) and the surface itself.
4
Compute. For uniform fields: \( \Phi_B = BA\cos\theta \). For non-uniform fields: set up and evaluate \( \int \vec{B} \cdot d\vec{A} \).
5
Check units. Your answer should be in webers (Wb) = \( \text{T} \cdot \text{m}^2 \).

Example 1: Uniform Field Through a Loop

\( \hat{n} \)
\( \vec{B} = 0.5\;\text{T} \)
\( \theta = 30^\circ \)
\( r = 0.2\;\text{m} \)

Example 2: Changing Angle with Time

A rectangular loop of area \( A = 0.1\;\text{m}^2 \) sits in a uniform field \( B = 0.3\;\text{T} \). The loop rotates so that at time \( t \), the angle between \( \vec{B} \) and \( \hat{n} \) is \( \theta = \omega t \), where \( \omega = 2\pi\;\text{rad/s} \).

Example 3: Non-Uniform Field

A magnetic field \( \vec{B} = B_0 x\,\hat{k} \) (where \( B_0 = 2\;\text{T/m} \)) points in the \( z \)-direction and varies with \( x \). Find the flux through a square loop of side \( a = 0.5\;\text{m} \) lying in the \( xy \)-plane, with one corner at the origin.

Gauss's Law for Magnetism

$$ \oint \vec{B} \cdot d\vec{A} = 0 $$

Flux in Flux out Closed surface

Flux Linkage for \( N \)-Turn Coils

$$ \Lambda = N\Phi_B = NBA\cos\theta $$

When a coil has \( N \) turns, each turn encloses the same flux \( \Phi_B \). The total flux linkage \( \Lambda \) is \( N \) times the flux through one turn.

\( N = 1 \)
\( \Lambda = \Phi_B \): single loop, no multiplication.
\( N = 100 \)
\( \Lambda = 100\Phi_B \): flux linkage is 100 times larger, producing 100 times the induced EMF.

Common Mistakes with Magnetic Flux

✕ Wrong Angle
Using the angle between \( \vec{B} \) and the surface instead of between \( \vec{B} \) and the surface normal. If the surface makes angle \( \alpha \) with \( \vec{B} \), then \( \theta = 90^\circ - \alpha \).
✕ Forgetting \( N \)
For multi-turn coils, forgetting to multiply by \( N \). A 200-turn coil has 200 times the flux linkage of a single loop.
✕ Using BA for Non-Uniform B
\( \Phi_B = BA\cos\theta \) only works when \( \vec{B} \) is uniform over the surface. For varying fields, you must integrate: \( \int \vec{B}\cdot d\vec{A} \).

Summary of Key Formulas

Concept Formula When to Use
Uniform flux \( \Phi_B = BA\cos\theta \) Constant \( \vec{B} \), flat surface
General flux \( \Phi_B = \int \vec{B}\cdot d\vec{A} \) Non-uniform \( \vec{B} \) or curved surface
Flux linkage \( \Lambda = N\Phi_B \) Multi-turn coils
Gauss (magnetism) \( \oint \vec{B}\cdot d\vec{A} = 0 \) Any closed surface
Faraday's Law \( \mathcal{E} = -N\frac{d\Phi_B}{dt} \) Changing flux induces EMF

Question 1 of 5

A uniform magnetic field of \( B = 0.4\;\text{T} \) passes through a flat circular loop of radius \( r = 0.1\;\text{m} \). The field is perpendicular to the plane of the loop. What is the magnetic flux?

Question 2 of 5

If the angle between \( \vec{B} \) and the area normal \( \hat{n} \) is \( 60^\circ \), by what factor is the flux reduced compared to when the field is perpendicular to the loop?

Question 3 of 5

The total magnetic flux through any closed surface is:

Question 4 of 5

A 50-turn coil has an area of \( 0.02\;\text{m}^2 \) in a uniform field \( B = 0.6\;\text{T} \) perpendicular to the coil. What is the total flux linkage?

Question 5 of 5

A magnetic field \( \vec{B} = 3x^2\,\hat{k}\;\text{T} \) passes through a square loop in the \( xy \)-plane with corners at \( (0,0) \) and \( (1,1) \) (in meters). What is \( \Phi_B \)?