01 / 21

Kirchhoff's
Loop Rule

Master the principle that governs voltage changes around any closed loop in a circuit: \(\sum V = 0\).

AP Physics C: E&M

What Is a Circuit Loop?

A loop is any closed path through a circuit that starts and ends at the same node. You can trace your finger along wires and components and return to where you started.

\(\mathcal{E}\) \(R_1\) \(R_2\) A B C D Loop

Energy Conservation in Circuits

A charge that travels around a complete loop returns to its starting point. Since voltage is energy per unit charge, the total energy gained must equal the total energy lost.

Energy Gained
EMF sources (batteries) increase the electric potential of a charge: they do work on it.
Energy Lost
Resistors decrease the electric potential: charges lose energy as heat via \(P = I^2 R\).

Why Does This Matter?

Real circuits have multiple loops, branches, and sources. The Loop Rule, combined with the Junction Rule, lets you write enough equations to solve for every unknown current and voltage in any circuit.

Multi-loop Circuits
Circuits with 2+ loops cannot be reduced to simple series/parallel combinations.
RC and RL Circuits
The Loop Rule gives the differential equations for charging/discharging capacitors and inductors.
AP Exam Staple
Free-response questions regularly require setting up and solving loop equations.

The Loop Rule: Formal Statement

"Algebraic" means we must respect signs. Gains in potential are positive; drops are negative (or vice versa, as long as you are consistent).

Sign Conventions for Loop Traversal

Resistor R I traverse direction With current: \(-IR\) traverse direction Against current: \(+IR\) EMF Source - + traverse direction - to +: \(+\mathcal{E}\) traverse direction + to -: \(-\mathcal{E}\) Choose a loop direction, then apply signs consistently.

Loop Rule vs. Junction Rule

Loop Rule (KVL) Junction Rule (KCL)
Based on Conservation of energy Conservation of charge
Equation \(\sum V_k = 0\) \(\sum I_{\text{in}} = \sum I_{\text{out}}\)
Applied to Any closed loop Any node/junction
Gives you Relationships between voltages Relationships between currents
Typical use Multi-loop, RC, RL circuits Branching points

How to Apply the Loop Rule

1
Label all currents. Assign a direction to each branch current. If you guess wrong, the answer will simply be negative.
2
Choose a loop and a traversal direction (clockwise or counterclockwise).
3
Walk around the loop. For each element, write the voltage change using sign conventions.
4
Set the sum equal to zero: \(\sum V_k = 0\).
5
Repeat for additional loops if there are more unknowns. Combine with junction equations and solve.

Example 1: Single Loop

- + \(\mathcal{E}\) 12 V \(R_1\) 4 \(\Omega\) \(R_2\) 2 \(\Omega\) \(R_3\) 6 \(\Omega\) I

Example 1: Voltage Drops

With \(I = 1\) A, we can find the voltage across each resistor using \(V = IR\):

\(V_{R_1}\)
\(1 \times 4 = \) 4 V
\(V_{R_2}\)
\(1 \times 2 = \) 2 V
\(V_{R_3}\)
\(1 \times 6 = \) 6 V

Example 2: Two EMF Sources

- + 20 V + - 8 V \(R\) = 4 \(\Omega\) I \(\mathcal{E}_1\) \(\mathcal{E}_2\)

Example 3: Multi-Loop Circuit

10 V \(R_1\) 2 \(\Omega\) \(R_2\) = 4 \(\Omega\) \(R_3\) 3 \(\Omega\) 6 V \(I_1\) \(I_2\) \(I_3\) A B

Example 3: Solving the System

1
Three equations, three unknowns:
\(I_1 = I_2 + I_3\)
\(10 - 2I_1 - 4I_2 = 0\)
\(4I_2 - 3I_3 - 6 = 0\)
2
Substitute \(I_1 = I_2 + I_3\) into the left loop equation:
\(10 - 2(I_2 + I_3) - 4I_2 = 0 \Rightarrow 10 - 6I_2 - 2I_3 = 0\)
3
From the right loop: \(I_3 = \frac{4I_2 - 6}{3}\). Substitute back:
\(10 - 6I_2 - 2 \cdot \frac{4I_2 - 6}{3} = 0\)
\(30 - 18I_2 - 8I_2 + 12 = 0\)
\(42 = 26I_2 \Rightarrow I_2 \approx 1.62\) A
4
Back-substitute: \(I_3 \approx \frac{4(1.62) - 6}{3} \approx 0.16\) A, \(I_1 \approx 1.78\) A

Application: RC Circuits

The Loop Rule is how we derive the differential equation for charging and discharging capacitors. For a series RC circuit:

\(\mathcal{E}\) R C I

Common Mistakes

✕ Wrong Sign on EMF
Forgetting that traversing a battery from + to - gives \(-\mathcal{E}\), not \(+\mathcal{E}\).
✕ Ignoring Current Direction
Writing \(-IR\) for every resistor regardless of whether you traverse with or against the current.
✕ Mixing Loops
Including a component that isn't part of the chosen loop. Each loop equation only covers elements on that loop's path.

Summary of Key Relationships

Element With Current Against Current
Resistor \(R\) \(-IR\) \(+IR\)
EMF (- to +) \(+\mathcal{E}\) \(+\mathcal{E}\)
EMF (+ to -) \(-\mathcal{E}\) \(-\mathcal{E}\)
Capacitor \(-\frac{q}{C}\) \(+\frac{q}{C}\)
Inductor \(-L\frac{dI}{dt}\) \(+L\frac{dI}{dt}\)

Question 1 of 5

Kirchhoff's Loop Rule is a direct consequence of the conservation of:

Question 2 of 5

A single loop contains a 9 V battery and three resistors: \(R_1 = 1\;\Omega\), \(R_2 = 2\;\Omega\), \(R_3 = 6\;\Omega\). What is the current in the loop?

Question 3 of 5

When traversing a loop, you cross a resistor in the same direction as the current \(I\). The voltage change across the resistor is:

Question 4 of 5

A loop contains two batteries: \(\mathcal{E}_1 = 15\) V and \(\mathcal{E}_2 = 5\) V (opposing), connected in series with a 5 \(\Omega\) resistor. What is the current?

Question 5 of 5

In an RC charging circuit with \(\mathcal{E} = 12\) V, \(R = 4\;k\Omega\), and \(C = 500\;\mu F\), what is the time constant \(\tau\)?