01 / 21

Inductance
Electromagnetic Inertia

Explore how changing currents create self-induced EMFs, the physics of inductors, and the energy stored in magnetic fields.

AP Physics C: E&M

What Is Inductance?

Inductance is the property of a conductor (or coil) that opposes changes in the electric current flowing through it. When current changes, the magnetic flux through the coil changes, inducing an EMF that resists the change: this is Lenz's law in action.

Self-Inductance: The Coil's Own Field

\(i\)
\(B\)
\(\Phi_B\)
Solenoid: \(N\) turns
Changing \(i\) \(\rightarrow\) Changing \(\Phi_B\) \(\rightarrow\) Induced EMF
Self-induced EMF opposes the change

Why Does Inductance Matter?

Energy Storage
Inductors store energy in magnetic fields, analogous to how capacitors store energy in electric fields.
Circuit Filtering
Inductors resist rapid current changes, making them essential in power supplies, radios, and signal processing.
Transformers
Mutual inductance between coils allows transformers to step voltages up or down across the power grid.

The Defining Equations

Flux Definition
$$ L = \frac{N \Phi_B}{i} $$
Faraday/Self-EMF
$$ \mathcal{E} = -L \frac{di}{dt} $$

Inductance of a Solenoid

\(\ell\) (length)
\(A\)
\(N\) turns, core permeability \(\mu\)

Self vs Mutual Inductance

Self-Inductance \( L \) Mutual Inductance \( M \)
Definition EMF induced in a coil by its own changing current EMF induced in one coil by a different coil's changing current
Formula \( \mathcal{E}_1 = -L \frac{di_1}{dt} \) \( \mathcal{E}_2 = -M \frac{di_1}{dt} \)
Depends on Single coil geometry Geometry of both coils and their proximity
Unit Henry (H) Henry (H)
Application Inductors, chokes Transformers, wireless charging

Energy Stored in a Magnetic Field

An inductor carrying current \( i \) stores energy in its magnetic field, analogous to how a charged capacitor stores energy in its electric field.

Inductor Energy
$$ U_L = \frac{1}{2} L i^2 $$
Capacitor Analogy
$$ U_C = \frac{1}{2} C V^2 $$

The RL Circuit

\(\mathcal{E}\)
\(S\)
\(R\)
\(L\)
\(i\)

RL Growth and Decay Curves

\(t\)
\(i\)
\(\mathcal{E}/R\)
\(\tau\)
\(2\tau\)
\(3\tau\)
Growth (charging)
Decay (discharging)
63%

How to Solve Inductance Problems

1
Identify the inductor. Determine \( L \) from geometry or given values. For a solenoid: \( L = \mu N^2 A / \ell \).
2
Write the circuit equation. Apply Kirchhoff's loop rule including the inductor EMF: \( \mathcal{E} - iR - L\frac{di}{dt} = 0 \).
3
Find the time constant. Compute \( \tau = L/R \) for RL circuits. This controls how fast current grows or decays.
4
Apply boundary conditions. At \( t = 0 \): inductor acts as an open circuit (if initially off). At \( t \to \infty \): inductor acts as a short circuit (wire).
5
Compute energy if needed. Use \( U = \frac{1}{2}Li^2 \) for stored energy or \( u_B = B^2/(2\mu_0) \) for energy density.

Example 1: Solenoid Inductance

A solenoid has 500 turns, length \( 0.25 \, \text{m} \), and cross-sectional area \( 4.0 \times 10^{-4} \, \text{m}^2 \). The core is air (\( \mu_0 = 4\pi \times 10^{-7} \, \text{H/m} \)). Find the inductance.

Example 2: RL Circuit Current

An RL circuit has \( \mathcal{E} = 12 \, \text{V} \), \( R = 4 \, \Omega \), and \( L = 8 \, \text{mH} \). Find the current at \( t = 3 \, \text{ms} \) after the switch closes.

Example 3: Energy in an Inductor

An inductor with \( L = 50 \, \text{mH} \) carries a steady current of \( 6 \, \text{A} \). How much energy is stored? If the current drops to zero in \( 2 \, \text{ms} \), what is the average induced EMF?

Common Mistakes

✕ Forgetting \( N^2 \)
Inductance depends on \( N^2 \), not \( N \). Doubling turns quadruples \( L \), not doubles it.
✕ Wrong time constant
For RL circuits \( \tau = L/R \). For RC circuits \( \tau = RC \). Do not mix them up: they have different dimensions.
✕ Dropping the negative sign
The self-induced EMF is \( \mathcal{E} = -L\frac{di}{dt} \). The negative sign is Lenz's law: it opposes the current change.

Inductance Summary

Quantity Formula Unit
Self-Inductance \( L = N\Phi_B / i \) Henry (H)
Self-Induced EMF \( \mathcal{E} = -L \frac{di}{dt} \) Volt (V)
Solenoid \( L \) \( L = \frac{\mu N^2 A}{\ell} \) H
Stored Energy \( U = \frac{1}{2}Li^2 \) Joule (J)
Energy Density \( u_B = \frac{B^2}{2\mu_0} \) \(\text{J/m}^3\)
RL Time Constant \( \tau = L/R \) Second (s)
RL Growth \( i = \frac{\mathcal{E}}{R}(1-e^{-t/\tau}) \) A
RL Decay \( i = i_0 e^{-t/\tau} \) A

Question 1 of 5

A solenoid's number of turns is tripled while all other dimensions remain the same. By what factor does the inductance change?

Question 2 of 5

In an RL circuit with \( L = 20 \, \text{mH} \) and \( R = 5 \, \Omega \), what is the time constant \( \tau \)?

Question 3 of 5

An inductor with \( L = 0.4 \, \text{H} \) carries \( 3 \, \text{A} \). How much energy is stored in the magnetic field?

Question 4 of 5

The current through a \( 10 \, \text{mH} \) inductor changes at a rate of \( 500 \, \text{A/s} \). What is the magnitude of the self-induced EMF?

Question 5 of 5

In an RL circuit, immediately after the switch is closed (at \( t = 0 \)), the inductor behaves most like: