01 / 21

Electric
Potential

Explore how energy per unit charge defines the electric landscape: from point charges to continuous distributions, master \( V \) and its relationship to \( \vec{E} \).

AP Physics C: E&M

What Is Electric Potential?

Electric potential \( V \) at a point in space is the electric potential energy per unit charge. It tells us how much work the electric field would do on a positive test charge moved from infinity to that point.

Unlike the electric field \( \vec{E} \), potential is a scalar quantity: no direction, just magnitude. This makes it far easier to compute for complex charge distributions.

Why Potential Matters

Scalar Simplicity
Add potentials algebraically: no vector components needed.
Energy Gateway
Potential difference \( \Delta V \) directly gives kinetic energy changes: \( \Delta K = -q \Delta V \).
Field Recovery
You can always get \( \vec{E} \) back: \( \vec{E} = -\nabla V \).

Visualizing Equipotential Surfaces

+Q
\(V_1\)
\(V_2\)
\(V_3\)
\(\vec{E}\)
Equipotential E-field

Potential of a Point Charge

\(r\)
\(V\)
\(+q: V > 0\)
\(-q: V < 0\)
\(V \to 0\)

Key insight: Potential from a positive charge is positive; from a negative charge, negative. It falls off as \( 1/r \), not \( 1/r^2 \) like the field.

Superposition of Potentials

\(+q_1\)
\(-q_2\)
P
\(r_1\)
\(r_2\)
\( V(P) = \frac{kq_1}{r_1} + \frac{k(-q_2)}{r_2} \)

Because potential is scalar, the positive contribution from \( q_1 \) and the negative contribution from \( q_2 \) just add as numbers.

Continuous Charge Distributions

When charge is spread over a line, surface, or volume, replace the sum with an integral over infinitesimal elements \( dq \):

Line Charge
\( dq = \lambda\, dl \)
Surface Charge
\( dq = \sigma\, dA \)
Volume Charge
\( dq = \rho\, dV \)

Recovering the Field: \( \vec{E} = -\nabla V \)

The electric field points in the direction of steepest decrease of \( V \). Its magnitude equals the rate of change of \( V \) with distance.

Potential vs. Electric Field

Property Electric Potential \( V \) Electric Field \( \vec{E} \)
Type Scalar Vector
Units Volts (V) N/C or V/m
Point charge \( kq/r \) \( kq/r^2 \)
Superposition Add numbers Add vectors
Relationship \( \vec{E} = -\nabla V \) and \( V = -\int \vec{E}\cdot d\vec{l} \)

Potential Difference & Work

A positive charge naturally moves from high to low potential, like a ball rolling downhill. A negative charge moves from low to high.

How to Solve Potential Problems

1
Identify the source charges and the point where you need \( V \).
2
Compute each distance \( r_i \) from each source charge to the field point.
3
Apply superposition: \( V = \sum kq_i / r_i \). Include signs of charges.
4
For continuous distributions, set up the integral \( \int k\, dq / r \) with the appropriate charge element.
5
Check units and sign. Positive charges raise \( V \); negative charges lower it.

Example 1: Two Point Charges

Charges \( q_1 = +3\;\mu\text{C} \) and \( q_2 = -2\;\mu\text{C} \) are 0.4 m apart. Find the potential at the midpoint.

+3μC -2μC M 0.2 m 0.2 m

Example 2: Potential on a Ring Axis

A uniformly charged ring of radius \( R \) and total charge \( Q \) lies in the \( xy \)-plane. Find \( V \) at distance \( x \) along the axis.

\(x\)
P
\(x\)
\(dq\)
\(r\)
\(R\)

Example 3: Speed from Potential Difference

A proton (mass \( m_p = 1.67 \times 10^{-27}\;\text{kg} \), charge \( e = 1.60 \times 10^{-19}\;\text{C} \)) is released from rest through a potential difference of \( \Delta V = 500 \;\text{V} \). Find its final speed.

Conductors and Potential

1
The entire conductor is an equipotential: \( V \) is constant throughout its volume and surface.
2
\( \vec{E} = 0 \) inside the conductor in electrostatic equilibrium, so \( \nabla V = 0 \) internally.
3
The surface field is perpendicular to the conductor: \( \vec{E} = \frac{\sigma}{\epsilon_0}\hat{n} \).
4
Charge resides on the surface only. Sharp points have higher \( \sigma \) and stronger \( E \).

Common Mistakes

✕ Forgetting Signs
Potential from a negative charge is negative. Always include the sign of \( q \) in \( V = kq/r \).
✕ Confusing V and E
Where \( V = 0 \) does NOT mean \( \vec{E} = 0 \). The field depends on the gradient of \( V \), not its value.
✕ Path Dependence
Potential difference is path-independent (conservative field). Don't integrate along arbitrary paths thinking the result changes.

Question 1 of 5

The electric potential at point P is \( V = 0 \). Which statement about the electric field at P is correct?

Question 2 of 5

Two charges \( +q \) and \( -q \) are separated by distance \( d \). What is the potential at the exact midpoint?

Question 3 of 5

An electron is accelerated from rest through a potential difference of \( \Delta V = 1000 \;\text{V} \). What kinetic energy does it gain?

Question 4 of 5

A hollow conducting sphere carries charge \( +Q \). What is the potential inside the sphere at its center?

Question 5 of 5

If the electric potential in a region is given by \( V(x) = 5x^2 - 3x + 2 \) (in SI units), what is \( E_x \) at \( x = 1\;\text{m} \)?