01 / 21

Electric Flux

Understand how electric field lines pass through surfaces, master the integral \(\Phi_E = \oint \vec{E} \cdot d\vec{A}\), and build toward Gauss's Law.

AP Physics C: E&M

What Is Electric Flux?

Electric flux measures how much electric field passes through a surface. Think of it as counting the number of field lines that pierce through an area. The more lines through the surface, the greater the flux.

Symbol
\(\Phi_E\) (capital phi)
Units
\(\text{N}\cdot\text{m}^2/\text{C}\) or \(\text{V}\cdot\text{m}\)
Scalar
Flux is a scalar quantity: it can be positive, negative, or zero

Field Lines Through a Surface

\(\hat{n}\) \(\theta\) \(\vec{E}\) \(d\vec{A}\)

Why Does Flux Matter?

Electric flux is the foundation of Gauss's Law: one of Maxwell's four equations. It lets us calculate electric fields for symmetric charge distributions far more easily than Coulomb's law.

1
Connects fields to charges: flux through a closed surface reveals the enclosed charge.
2
Simplifies calculations: exploit symmetry (spherical, cylindrical, planar) to find \(\vec{E}\) quickly.
3
Gateway to Maxwell's equations: the same concept of flux extends to magnetic fields and electromagnetic waves.

Flux Through a Flat Surface

\(\theta = 0^\circ\)
\(\vec{E}\) perpendicular to surface: maximum flux \(\Phi_E = EA\)
\(\theta = 90^\circ\)
\(\vec{E}\) parallel to surface: zero flux \(\Phi_E = 0\)

The General Flux Integral

From Flux to Gauss's Law

+ Gaussian surface \(+q\)

Flux vs. Field Strength

Electric Flux \(\Phi_E\) Electric Field \(\vec{E}\)
Type Scalar Vector
Units \(\text{N}\cdot\text{m}^2/\text{C}\) \(\text{N}/\text{C}\) or \(\text{V}/\text{m}\)
Depends on \(\vec{E}\), area \(A\), angle \(\theta\) Charge \(q\), distance \(r\)
Can be zero when \(\vec{E} \perp \hat{n}\) or no net enclosed charge Only at specific equilibrium points
Role Measures "flow" through a surface Measures force per unit charge at a point

Three Factors That Control Flux

Stronger E More flux Larger A More flux \(\hat{n}\) Angle \(\theta\) cos θ factor

How to Calculate Electric Flux

1
Identify the surface: Is it open (flat plane, disk) or closed (sphere, cube)? Determine \(d\vec{A}\).
2
Find the normal direction: For closed surfaces, \(\hat{n}\) points outward. For open surfaces, choose a consistent direction.
3
Determine if \(\vec{E}\) is uniform: If yes, use \(\Phi_E = EA\cos\theta\). If not, set up the integral \(\int \vec{E}\cdot d\vec{A}\).
4
Evaluate the dot product: Compute \(\vec{E}\cdot\hat{n}\) at each point or factor it out if constant over the surface.
5
Integrate or multiply: Sum up contributions from all area elements to get the total flux.

Example 1: Uniform Field Through a Flat Surface

A uniform electric field \(\vec{E} = 500\;\text{N/C}\) points in the \(+x\) direction. A flat rectangular surface of area \(A = 0.2\;\text{m}^2\) has its normal at \(\theta = 60^\circ\) to \(\vec{E}\). Find the flux.

\(\hat{n}\) \(E = 500\;\text{N/C}\) \(60^\circ\) \(A = 0.2\;\text{m}^2\)

Example 2: Flux Through a Closed Cube

A uniform field \(\vec{E} = E_0\hat{x}\) passes through a cube of side \(L\). What is the net flux through the entire cube?

\(\vec{E}\) \(-E_0 L^2\) \(+E_0 L^2\) \(L\)

Example 3: Point Charge in a Sphere

A point charge \(q = +3\;\mu\text{C}\) sits at the center of a spherical Gaussian surface of radius \(R\). Find the total flux through the sphere.

Sign Conventions for Flux

Positive Flux
Field lines leave the closed surface (point outward along \(\hat{n}\)). Occurs when net enclosed charge is positive.
Negative Flux
Field lines enter the closed surface (point inward, opposite \(\hat{n}\)). Occurs when net enclosed charge is negative.
Zero Net Flux
Equal flux enters and exits. Occurs when the enclosed charge is zero, even if a strong field passes through.

Common Mistakes with Electric Flux

Forgetting \(\cos\theta\)
Using \(\Phi = EA\) when the field is not perpendicular to the surface. Always include the \(\cos\theta\) factor.
Wrong Normal Direction
Choosing the inward normal instead of the outward normal for closed surfaces flips the sign of the flux.
Confusing Flux with Field
Assuming zero net flux means zero field. A uniform field through a cube gives zero net flux but \(\vec{E} \neq 0\).

Summary of Key Formulas

Scenario Formula When to Use
Uniform \(\vec{E}\), flat surface \(\Phi_E = EA\cos\theta\) Constant field, planar area
General surface \(\Phi_E = \int_S \vec{E}\cdot d\vec{A}\) Non-uniform field or curved surface
Closed surface \(\oint \vec{E}\cdot d\vec{A} = q_{\text{enc}}/\varepsilon_0\) Gauss's Law: relates flux to enclosed charge
Point charge, sphere \(\Phi_E = q / \varepsilon_0\) Spherical symmetry, charge at center

Question 1 of 5

A uniform electric field of magnitude \(E = 200\;\text{N/C}\) passes through a circular disk of radius \(r = 0.1\;\text{m}\). The field makes an angle of \(30^\circ\) with the normal to the disk. What is the electric flux through the disk?

Question 2 of 5

A uniform electric field is directed parallel to a flat surface. What is the electric flux through that surface?

Question 3 of 5

A closed spherical surface surrounds a charge of \(q = -5\;\mu\text{C}\). What is the net electric flux through the sphere? Use \(\varepsilon_0 = 8.85 \times 10^{-12}\;\text{C}^2/(\text{N}\cdot\text{m}^2)\).

Question 4 of 5

A cube with side length \(L\) is placed in a non-uniform electric field. The net flux through the cube is measured to be \(1000\;\text{N}\cdot\text{m}^2/\text{C}\). How much charge is enclosed by the cube?

Question 5 of 5

A Gaussian surface encloses two charges: \(+4\;\mu\text{C}\) and \(-4\;\mu\text{C}\). What is the net flux through the surface?