01 / 21

Electric
Current

Master the flow of charge through conductors: from drift velocity to current density, and learn to solve circuits at the AP Physics C level.

AP Physics C: E&M

What is Electric Current?

Electric current is the rate at which electric charge flows past a point in a conductor. Whenever charges are in motion, a current exists.

1 Ampere
\( 1\;\text{A} = 1\;\text{C/s} \): one coulomb of charge per second
Conventional
Current direction follows positive charge flow, opposite to electron drift

Visualizing Charge Flow

\(e^-\)
\(e^-\)
\(e^-\)
\(e^-\)
\(e^-\)
\(e^-\)
Electron drift \(v_d\)
Conventional Current \(I\)
− +

Why Current Matters

Electric current is the fundamental quantity connecting voltage, resistance, and power. Every circuit analysis starts by finding the current.

Ohm's Law
\( V = IR \): current links voltage to resistance
Power
\( P = IV \): current determines energy dissipation
Magnetism
Moving charges create magnetic fields: \( \vec{B} \) depends on \( I \)

Current Density and Drift Velocity

\( n \)
Number density of charge carriers (\(\text{m}^{-3}\))
\( q \)
Charge per carrier (C): for electrons, \( q = e \)
\( v_d \)
Drift velocity: typically \( \sim 10^{-4} \) m/s in copper

The Core Equation: \( I = nqv_dA \)

\(A\)
\(v_d \cdot dt\)
\(+\)
\(+\)
\(+\)
\(+\)
\(+\)
\(+\)
\(I\)
\(n \text{ carriers/m}^3\)

The Integral Form

When \( \vec{J} \) is uniform and perpendicular to a flat surface of area \( A \), this simplifies to \( I = JA \). But for AP Physics C, you must be ready to integrate \( \vec{J} \) that varies with position.

Current vs. Current Density

Current \( I \) Current Density \( \vec{J} \)
Type Scalar Vector field
Units Amperes (A) \(\text{A/m}^2\)
Depends on geometry? Yes: total through a surface No: local property at a point
Ohm's Law form \( V = IR \) \( \vec{J} = \sigma\vec{E} \)
Relation \( I = \displaystyle\int \vec{J}\cdot d\vec{A} \)

How to Solve Current Problems

1
Identify the quantity given. Is it charge vs. time, current density, or drift velocity?
2
Choose the right formula. Constant current: \( I = Q/t \). Time-varying: \( I = dQ/dt \). Non-uniform \( J \): integrate.
3
Set up the geometry. For \( I = \int \vec{J}\cdot d\vec{A} \), pick the correct \( dA \) element (often \( 2\pi r\,dr \) for cylindrical symmetry).
4
Evaluate and check units. Current must be in amperes. Verify dimensions at every step.

Example 1: Constant Current

A wire carries a steady current of \( I = 3.0 \) A. How much charge passes through a cross-section in \( t = 2.0 \) minutes?

1
Convert time: \( t = 2.0\;\text{min} = 120\;\text{s} \)
2
Apply definition: \( Q = It = (3.0)(120) \)
3
Result: \( Q = 360\;\text{C} \)

Example 2: Time-Varying Charge

The charge through a wire is given by \( Q(t) = 4t^3 - 2t + 1 \) (in coulombs, \( t \) in seconds). Find the current at \( t = 2\;\text{s} \).

1
Differentiate: \( I = \dfrac{dQ}{dt} = 12t^2 - 2 \)
2
Substitute: \( I(2) = 12(4) - 2 = 48 - 2 \)
3
Result: \( I = 46\;\text{A} \)

Example 3: Non-Uniform \( J(r) \)

A cylindrical wire of radius \( R \) carries a current density \( J(r) = J_0\left(\dfrac{r}{R}\right)^2 \). Find the total current.

\(r\)
\(R\)
\(dr\)
\(dA = 2\pi r\,dr\)
Setup:
\( I = \int \vec{J} \cdot d\vec{A} \)
\( \phantom{I} = \int_0^R J_0\left(\frac{r}{R}\right)^2 \cdot 2\pi r\,dr \)
\( \phantom{I} = \frac{2\pi J_0}{R^2} \int_0^R r^3\,dr \)
\( \phantom{I} = \frac{2\pi J_0}{R^2} \left[ \frac{R^4}{4} \right] \)
\( I = \frac{\pi J_0 R^2}{2} \)

Example 4: Drift Velocity in Copper

A copper wire (diameter 1.0 mm) carries \( I = 1.0 \) A. Copper has \( n = 8.5 \times 10^{28} \) \(\text{electrons/m}^3\). Find the drift velocity.

1
Cross-sectional area: \( A = \pi r^2 = \pi(0.5\times10^{-3})^2 = 7.85\times10^{-7}\;\text{m}^2 \)
2
Rearrange: \( v_d = \dfrac{I}{nqA} = \dfrac{1.0}{(8.5\times10^{28})(1.6\times10^{-19})(7.85\times10^{-7})} \)
3
Result: \( v_d \approx 9.4\times10^{-5}\;\text{m/s} \approx 0.094\;\text{mm/s} \)

Resistivity and Ohm's Law

Microscopic
\( \vec{J} = \sigma\vec{E} \) or equivalently \( \vec{E} = \rho\vec{J} \)
Macroscopic
\( V = IR \) where \( R = \dfrac{\rho L}{A} \)
\(L\)
\(A\)
\(\rho\)
\( R = \frac{\rho L}{A} \)
\(V_+\)
\(V_-\)

Common Mistakes

✕ Confusing \( I \) and \( J \)
Using current \( I \) in equations that require current density \( J \), or vice versa. Remember: \( J \) is per unit area.
✕ Wrong sign convention
Forgetting that conventional current flows opposite to electron motion. The current direction is the direction of positive charge flow.
✕ Using \( I = Q/t \) for non-constant \( I \)
When \( Q(t) \) is a polynomial or other function, you must differentiate: \( I = dQ/dt \), not divide total charge by total time.

Key Equations Summary

Equation Form When to Use
Definition of current \( I = \dfrac{dQ}{dt} \) Always: foundational
Drift velocity form \( I = nqv_dA \) Microscopic: given \( n, v_d \)
Current density integral \( I = \int \vec{J}\cdot d\vec{A} \) Non-uniform \( J(r) \)
Ohm's Law (micro) \( \vec{J} = \sigma\vec{E} \) Connecting \( E \)-field to \( J \)
Ohm's Law (macro) \( V = IR \) Circuit analysis
Resistance \( R = \dfrac{\rho L}{A} \) Given material & geometry

Question 1 of 5

The charge flowing through a wire is given by \( Q(t) = 5t^2 + 3t \) (in coulombs). What is the current at \( t = 3\;\text{s} \)?

Question 2 of 5

A copper wire has \( n = 8.5 \times 10^{28}\;\text{m}^{-3} \) and cross-sectional area \( A = 1.0 \times 10^{-6}\;\text{m}^2 \). If the drift velocity is \( v_d = 7.4 \times 10^{-5}\;\text{m/s} \), what is the current?

Question 3 of 5

A wire has current density \( J(r) = J_0 \) (uniform) and radius \( R \). If the radius is doubled while \( J_0 \) stays the same, by what factor does the total current change?

Question 4 of 5

Which statement correctly describes the relationship between conventional current and electron flow in a metallic conductor?

Question 5 of 5

The microscopic form of Ohm's Law is \( \vec{J} = \sigma\vec{E} \). If the conductivity \( \sigma \) of a material doubles while the electric field \( \vec{E} \) stays constant, what happens to the current density?