01 / 21
+ −

Dielectrics
in Capacitors

Explore how insulating materials placed between capacitor plates alter capacitance, electric fields, and energy storage: the physics behind every electronic device.

AP Physics C: E&M

What Is a Dielectric?

A dielectric is an insulating material that can be inserted between the plates of a capacitor. Unlike conductors, dielectrics have no free charges: instead, their bound molecular charges polarize in an external electric field.

Polar Dielectrics
Molecules with permanent dipole moments (e.g., water) that align with the field.
Nonpolar Dielectrics
Molecules with no permanent dipole that develop induced dipoles (e.g., polyethylene).

How Polarization Works

+ − Dielectric Material \(E_0\) \(E_{\text{ind}}\)

Why Dielectrics Matter

1
Increase capacitance without enlarging the plates: more charge stored per volt.
2
Raise breakdown voltage: dielectrics tolerate higher \(V\) before arcing.
3
Physically separate plates: maintain a precise gap in real-world capacitors.
4
Essential in electronics: every smartphone, circuit board, and DRAM chip relies on dielectric layers.

The Dielectric Constant \(\kappa\)

Every dielectric is characterized by a dimensionless constant \(\kappa \geq 1\). For vacuum, \(\kappa = 1\); for common materials it ranges from about 2 to 80.

Air
\(\kappa \approx 1.0006\)
Paper
\(\kappa \approx 3.7\)
Glass
\(\kappa \approx 5 - 10\)
Water
\(\kappa \approx 80\)

Core Equations for Dielectrics

1
Capacitance with dielectric: \(\displaystyle C = \kappa\,\frac{\varepsilon_0 A}{d} = \frac{\varepsilon A}{d}\) where \(\varepsilon = \kappa\varepsilon_0\).
2
Net electric field: \(\displaystyle E = \frac{E_0}{\kappa} = \frac{\sigma}{\kappa\varepsilon_0}\).
3
Stored energy: \(\displaystyle U = \frac{Q^2}{2C} = \frac{1}{2}CV^2 = \frac{1}{2}\varepsilon_0 \kappa E^2 \cdot (Ad)\).
4
Gauss's law (modified): \(\displaystyle \oint \vec{D}\cdot d\vec{A} = Q_{\text{free}}\) where \(\vec{D} = \varepsilon_0 \kappa \vec{E}\).

Charge Held Constant vs. Voltage Held Constant

\(\kappa\) Q constant V ↓ C ↑ U ↓ \(\kappa\) V constant Q ↑ C ↑ U ↑ vs.

Isolated vs. Battery-Connected

Quantity Isolated (Q fixed) Battery (V fixed)
Capacitance \(C\) \(\kappa C_0\) ↑ \(\kappa C_0\) ↑
Charge \(Q\) unchanged \(\kappa Q_0\) ↑
Voltage \(V\) \(V_0 / \kappa\) ↓ unchanged
Electric field \(E\) \(E_0 / \kappa\) ↓ unchanged
Energy \(U\) \(U_0 / \kappa\) ↓ \(\kappa U_0\) ↑

Gauss's Law with Dielectrics

In the presence of dielectrics, we distinguish free charges (on conductors) from bound charges (on dielectric surfaces). The displacement field \(\vec{D}\) accounts for both:

How to Solve Dielectric Problems

1
Identify constraints: is the capacitor isolated (\(Q\) constant) or connected to a battery (\(V\) constant)?
2
Find \(C_0\) without dielectric: use \(\displaystyle C_0 = \varepsilon_0 A / d\) for parallel plates.
3
Apply \(C = \kappa C_0\): multiply by \(\kappa\) of the dielectric.
4
Derive the rest: use \(Q = CV\), \(U = \tfrac{1}{2}CV^2 = Q^2/2C\), keeping the fixed quantity constant.
5
Check directions: \(C\) always increases. For isolated: \(V\) and \(U\) decrease. For battery: \(Q\) and \(U\) increase.

Example 1: Isolated Capacitor

A parallel-plate capacitor with \(C_0 = 20\;\text{pF}\) is charged to \(V_0 = 100\;\text{V}\), then disconnected from the battery. A glass slab with \(\kappa = 5\) is inserted. Find the new \(C\), \(V\), and \(U\).

Example 2: Battery-Connected Capacitor

The same capacitor (\(C_0 = 20\;\text{pF}\)) stays connected to a \(100\;\text{V}\) battery while the glass (\(\kappa = 5\)) is inserted. Find the new \(Q\) and \(U\).

Example 3: Partial Dielectric Fill

A parallel-plate capacitor (area \(A\), separation \(d\)) is half-filled with a dielectric of constant \(\kappa\) along the gap (thickness \(d/2\)). Find the effective capacitance.

\(\kappa\) vacuum \(d/2\) \(d/2\)

Energy Density in a Dielectric

The energy stored per unit volume in an electric field within a dielectric is:

Since \(\kappa > 1\) and \(E\) is reduced for isolated capacitors, the energy density inside the dielectric decreases compared to vacuum: the field is weaker, and energy has been released as the dielectric is pulled inward.

Common Mistakes

✕ Wrong constraint
Assuming \(V\) stays the same when the battery is disconnected: \(Q\) is constant for isolated capacitors, not \(V\).
✕ Dividing \(C\) by \(\kappa\)
The dielectric always increases \(C\): multiply by \(\kappa\), never divide.
✕ Wrong series/parallel model
Filling half the gap (along \(d\)) is series; filling half the area is parallel. Mixing these up gives the wrong formula.

Summary of Key Formulas

Concept Formula
Capacitance \(C = \kappa C_0 = \kappa \varepsilon_0 A/d\)
Electric field \(E = E_0 / \kappa = \sigma / (\kappa\varepsilon_0)\)
Displacement field \(\vec{D} = \kappa\varepsilon_0\vec{E}\)
Gauss (dielectric) \(\oint \vec{D}\cdot d\vec{A} = Q_{\text{free}}\)
Energy density \(u = \frac{1}{2}\kappa\varepsilon_0 E^2\)
Bound charge \(\sigma_b = \varepsilon_0(\kappa-1)E\)

Question 1 of 5

A parallel-plate capacitor is charged and then disconnected from the battery. A dielectric with \(\kappa = 4\) is inserted. What happens to the voltage across the capacitor?

Question 2 of 5

A capacitor stays connected to a battery while a dielectric (\(\kappa = 3\)) is inserted. How does the stored energy change?

Question 3 of 5

The displacement field \(\vec{D}\) inside a dielectric satisfies \(\oint \vec{D}\cdot d\vec{A} = Q_{\text{free}}\). What charge does this integral exclude?

Question 4 of 5

A parallel-plate capacitor (plate area \(A\), separation \(d\)) is filled with a dielectric of \(\kappa = 6\) across half the plate area, while the other half remains vacuum. What is the effective capacitance?

Question 5 of 5

An isolated charged capacitor has energy \(U_0\). A dielectric with \(\kappa = 2\) is inserted. Where did the lost energy go?