01 / 21

Compound
DC Circuits

Master series-parallel combinations, apply Kirchhoff's laws, and solve real compound circuits with confidence.

AP Physics C: E&M

What Is a Compound Circuit?

A compound circuit (also called a combination circuit) contains both series and parallel subcircuits connected to a single voltage source. Unlike pure series or pure parallel networks, compound circuits require you to identify sub-groups and reduce them step by step.

Series vs Parallel: Quick Review

Series
Same current through all elements. Voltages add: \( V = V_1 + V_2 + \cdots \). Resistance adds: \( R_{eq} = R_1 + R_2 + \cdots \)
Parallel
Same voltage across all branches. Currents add: \( I = I_1 + I_2 + \cdots \). Reciprocals add: \( \frac{1}{R_{eq}} = \frac{1}{R_1} + \frac{1}{R_2} + \cdots \)

Anatomy of a Compound Circuit

+ −
\(V\)
\(R_1\)
A
\(R_2\)
\(R_3\)
B
\(R_1\) in series with \((R_2 \| R_3)\)

Kirchhoff's Laws

KCL: Junction Rule
The sum of currents entering any junction equals the sum leaving: \( \sum I_{\text{in}} = \sum I_{\text{out}} \). This is conservation of charge.
KVL: Loop Rule
Around any closed loop, the sum of all voltage gains and drops is zero: \( \sum \Delta V = 0 \). This is conservation of energy.

Equivalent Resistance Formulas

1
Series: \( R_{\text{eq}} = R_1 + R_2 + R_3 + \cdots \)
2
Parallel: \( \dfrac{1}{R_{\text{eq}}} = \dfrac{1}{R_1} + \dfrac{1}{R_2} + \dfrac{1}{R_3} + \cdots \)
3
Two-resistor shortcut: \( R_{\text{eq}} = \dfrac{R_1 \cdot R_2}{R_1 + R_2} \)

Reducible vs Multi-Loop Circuits

Reducible (Series-Parallel) Multi-Loop (Kirchhoff)
Topology Every resistor is clearly series or parallel with another Contains bridges or multiple EMFs that prevent simple grouping
Method Collapse groups into \( R_{\text{eq}} \) Write KCL + KVL equations and solve the system
Typical exam question Find total resistance, total current Find current in one specific branch
Example \(R_1\) in series with \((R_2 \| R_3)\) Wheatstone bridge, two-battery loops

How to Solve Compound Circuits

1
Identify groups: Find all series and parallel sub-groups within the circuit.
2
Reduce innermost group: Calculate \( R_{\text{eq}} \) for the innermost parallel or series combination.
3
Redraw the circuit with the equivalent resistance replacing the group.
4
Repeat until a single \( R_{\text{eq}} \) remains. Find total current: \( I_T = V / R_{\text{eq}} \).
5
Back-substitute: Work backwards to find individual voltages and branch currents.

Example 1: Finding \( R_{\text{eq}} \)

24 V
\(4\;\Omega\)
\(6\;\Omega\)
\(12\;\Omega\)

Example 1: Branch Currents

With \( I_T = 3\,\text{A} \) flowing through \( R_1 = 4 \;\Omega \):

1
Voltage across \( R_1 \): \( V_1 = I_T \cdot R_1 = 3\,\text{A} \times 4\,\Omega = \) \(12\,\text{V}\)
2
Voltage across the parallel group: \( V_{\parallel} = 24\,\text{V} - 12\,\text{V} = \) \(12\,\text{V}\)
3
Current through \(R_2\): \( I_2 = \frac{12\,\text{V}}{6\,\Omega} = \) \(2\,\text{A}\)
4
Current through \(R_3\): \( I_3 = \frac{12\,\text{V}}{12\,\Omega} = \) \(1\,\text{A}\)

Example 2: Nested Compound Circuit

30 V
\(2\;\Omega\)
\(R_1\)
\(3\;\Omega\)
\(R_2\)
\(3\;\Omega\)
\(R_3\)
\(6\;\Omega\)
\(R_4\)

Example 2: Power Dissipation

Continuing from the previous slide with \( I_T = 6\,\text{A} \) and \( V = 30\,\text{V} \):

1
\( V_1 = I_T R_1 = 6\,\text{A} \times 2\,\Omega = 12\,\text{V} \), so \( V_\parallel = 30\,\text{V} - 12\,\text{V} = \) \(18\,\text{V}\)
2
Top branch: \( I_{2,3} = \frac{18\,\text{V}}{6\,\Omega} = 3\,\text{A} \). Bottom branch: \( I_4 = \frac{18\,\text{V}}{6\,\Omega} = 3\,\text{A} \)
3
Power in \( R_1 \): \( P_1 = I_T^2 R_1 = (6\,\text{A})^2 \times 2\,\Omega = \) \(72\,\text{W}\)
4
Power in \( R_4 \): \( P_4 = \frac{V_\parallel^2}{R_4} = \frac{(18\,\text{V})^2}{6\,\Omega} = \) \(54\,\text{W}\)

Example 3: Two-Loop Kirchhoff Analysis

\(\varepsilon_1=12\,\text{V}\)
\(\varepsilon_2=6\,\text{V}\)
\(4\;\Omega\)
\(R_1\)
\(2\;\Omega\)
\(R_2\)
\(6\;\Omega\)
\(R_3\)
\(I_1 \rightarrow\)
\(\leftarrow I_2\)
\(I_3 \downarrow\)

Solving the System of Equations

1
From the loop equations:
\( I_1 = \frac{12 - 6I_3}{4} = 3 - 1.5\,I_3 \)
\( I_2 = \frac{6I_3 - 6}{2} = 3\,I_3 - 3 \)
2
Substitute into KCL \( I_3 = I_1 - I_2 \):
\( I_3 = (3 - 1.5\,I_3) - (3\,I_3 - 3) \)
3
Simplify:
\( I_3 = 3 - 1.5\,I_3 - 3\,I_3 + 3 = 6 - 4.5\,I_3 \)
\( 5.5\,I_3 = 6 \)
\( I_3 = \frac{12}{11} \approx 1.09\,\text{A} \)
4
Back-substitute:
\( I_1 = 3 - 1.5 \times \frac{12}{11} = 3 - \frac{18}{11} = \frac{15}{11} \approx 1.36\,\text{A} \)
\( I_2 = 3 \times \frac{12}{11} - 3 = \frac{36}{11} - 3 = \frac{3}{11} \approx 0.27\,\text{A} \)

Common Mistakes to Avoid

✕ Adding Parallel Directly
Writing \( R_{\text{eq}} = R_1 + R_2 \) for parallel resistors. You must use reciprocals: \( \frac{1}{R_{\text{eq}}} = \frac{1}{R_1} + \frac{1}{R_2} \).
✕ Wrong Group ID
Treating resistors as parallel when they share only one node. Parallel means both terminals connect to the same two nodes.
✕ Forgetting Back-Sub
Finding total current but stopping there. The exam typically asks for individual branch voltages or currents: always unpack.

Summary Table

Property Series Parallel Compound
Current Same through all Splits at junctions Both behaviors
Voltage Divides across elements Same across branches Both behaviors
\( R_{\text{eq}} \) \( R_1 + R_2 + \cdots \) \( \left(\sum \frac{1}{R_i}\right)^{-1} \) Reduce in stages
Key tool Ohm's law Current divider Kirchhoff + Ohm

Question 1 of 5

Two resistors \( R_1 = 10\;\Omega \) and \( R_2 = 10\;\Omega \) are connected in parallel. What is their equivalent resistance?

Question 2 of 5

A \( 3\;\Omega \) resistor is in series with a parallel combination of \( 6\;\Omega \) and \( 6\;\Omega \). A \(12\,\text{V}\) battery drives the circuit. What is the total current?

Question 3 of 5

In a compound circuit, \(4\,\text{A}\) flows through a \( 5\;\Omega \) series resistor before splitting into two parallel branches. If one branch has \( 8\;\Omega \), the voltage across each parallel branch is:

Question 4 of 5

Kirchhoff's loop rule (KVL) is a consequence of conservation of:

Question 5 of 5

A compound circuit has \( R_{\text{eq}} = 12\;\Omega \) connected to a \(48\,\text{V}\) source. The total power dissipated by the circuit is: