01 / 21

LR Circuits
Resistors & Inductors

Explore how inductors oppose changes in current, creating exponential growth and decay in circuits governed by the time constant \(\tau = L/R\).

AP Physics C: E&M

What Is an Inductor?

An inductor is a coil of wire that stores energy in a magnetic field when current flows through it. Its key property is inductance \(L\), measured in henrys (H).

Inductor (L) A B I

Energy Stored in an Inductor

Just as a capacitor stores energy in an electric field, an inductor stores energy in a magnetic field. The energy stored is:

Capacitor Analogy
\(U_C = \frac{1}{2}CV^2\) stores energy in an electric field
Inductor
\(U_L = \frac{1}{2}LI^2\) stores energy in a magnetic field

The LR Circuit

An LR circuit consists of a resistor \(R\) and inductor \(L\) connected in series with a voltage source \(\mathcal{E}\). The inductor's opposition to current change creates exponential behavior.

\(\mathcal{E}\)
S R L
\(I(t)\)

KVL for the LR Circuit

Applying Kirchhoff's Voltage Law around the loop when the switch closes:

The solution gives us the current as a function of time during the growth phase:

The Time Constant \(\tau = L/R\)

The time constant \(\tau\) determines how quickly the current reaches its steady-state value \(I_{\max} = \mathcal{E}/R\).

1
At \(t = \tau\): current reaches 63.2% of \(I_{\max}\)
2
At \(t = 2\tau\): current reaches 86.5% of \(I_{\max}\)
3
At \(t = 3\tau\): current reaches 95.0% of \(I_{\max}\)
4
At \(t = 5\tau\): current reaches 99.3%: effectively steady state

Current Growth in an LR Circuit

t
\(I(t)\)
\(\mathcal{E}/R\)
\(\tau\)
\(2\tau\)
\(3\tau\)
\(5\tau\)
63.2% 0

Current Decay in an LR Circuit

When the battery is removed and the inductor discharges through the resistor, the current decays exponentially:

t
\(I(t)\)
\(I_0\)
\(\tau\)
\(2\tau\)
\(3\tau\)
36.8% 0

Voltage Across \(R\) and \(L\)

During current growth, the voltages across the resistor and inductor are complementary:

Resistor Voltage
$$V_R = \mathcal{E}\!\left(1 - e^{-t/\tau}\right)$$Grows from 0 to \(\mathcal{E}\)
Inductor Voltage
$$V_L = \mathcal{E}\,e^{-t/\tau}$$Decays from \(\mathcal{E}\) to 0

LR vs RC Circuits

LR Circuit RC Circuit
Energy stored in Magnetic field Electric field
Time constant \(\tau\) \(L/R\) \(RC\)
Energy formula \(\frac{1}{2}LI^2\) \(\frac{1}{2}CV^2\)
Opposes changes in Current Voltage
At \(t=0\) (energizing) \(I=0\) (open) \(V=0\) (short)
At \(t=\infty\) \(I=\mathcal{E}/R\) (short) \(V=\mathcal{E}\) (open)

How to Solve LR Circuit Problems

1
Identify the phase: Is the circuit energizing (switch closes, battery connected) or de-energizing (battery removed)?
2
Find the time constant: Calculate \(\tau = L/R\) using the inductor and total series resistance.
3
Determine initial and final values: At \(t=0\) and \(t \to \infty\), what is the current?
4
Apply the correct equation: Growth: \(I = I_{\max}(1-e^{-t/\tau})\). Decay: \(I = I_0\,e^{-t/\tau}\).
5
Find voltages: Use \(V_R = IR\) and \(V_L = L\,dI/dt\). Verify \(V_R + V_L = \mathcal{E}\).

Example 1: Finding Current

A circuit has \(\mathcal{E} = 12\) V, \(R = 4\;\Omega\), and \(L = 8\) mH. The switch closes at \(t = 0\). Find the current at \(t = 3\) ms.

1
Time constant: \(\tau = L/R = 0.008/4 = 0.002\) s \(= 2\) ms
2
Maximum current: \(I_{\max} = \mathcal{E}/R = 12/4 = 3\) A
3
Apply growth equation: \(I(3\text{ ms}) = 3(1 - e^{-3/2}) = 3(1 - 0.223)\)
4
Result: \(I \approx 3 \times 0.777 = \) 2.33 A

Example 2: Inductor Voltage

Using the same circuit (\(\mathcal{E} = 12\) V, \(R = 4\;\Omega\), \(L = 8\) mH), find \(V_L\) at \(t = 2\) ms (one time constant).

1
Inductor voltage formula: \(V_L = \mathcal{E}\,e^{-t/\tau}\)
2
Substitute: \(V_L = 12\,e^{-2/2} = 12\,e^{-1}\)
3
Result: \(V_L = 12 \times 0.368 = \) 4.41 V

Example 3: Current Decay

An inductor carrying \(I_0 = 5\) A is suddenly disconnected from the battery and discharges through \(R = 10\;\Omega\). If \(L = 0.2\) H, how long until \(I = 0.5\) A?

1
Time constant: \(\tau = L/R = 0.2/10 = 0.02\) s \(= 20\) ms
2
Decay equation: \(0.5 = 5\,e^{-t/0.02}\)
3
Solve: \(e^{-t/0.02} = 0.1 \implies -t/0.02 = \ln(0.1)\)
4
Result: \(t = -0.02 \times (-2.303) = \) 46.1 ms

Common Mistakes in LR Circuits

✕ Wrong Time Constant
Using \(\tau = RC\) instead of \(\tau = L/R\). Remember: LR and RC have reciprocal structures.
✕ Swapping Growth and Decay
Using the decay formula \(I_0 e^{-t/\tau}\) when current is growing, or vice versa. Identify the phase first.
✕ Ignoring Inductor at \(t = 0\)
Treating the inductor as a wire at \(t=0\). Initially, \(V_L = \mathcal{E}\) and \(I = 0\): the inductor blocks sudden current changes.

Summary of Key Equations

Quantity Energizing De-energizing
Current \(I(t)\) \(\frac{\mathcal{E}}{R}(1 - e^{-t/\tau})\) \(I_0\,e^{-t/\tau}\)
Voltage \(V_R(t)\) \(\mathcal{E}(1 - e^{-t/\tau})\) \(I_0 R\,e^{-t/\tau}\)
Voltage \(V_L(t)\) \(\mathcal{E}\,e^{-t/\tau}\) \(-I_0 R\,e^{-t/\tau}\)
Time constant \(\tau = L/R\)
Energy stored \(U = \frac{1}{2}LI^2\)

Question 1 of 5

An LR circuit has \(L = 0.5\) H and \(R = 100\;\Omega\). What is the time constant \(\tau\)?

Question 2 of 5

In an energizing LR circuit, what is the current at \(t = 0\) (the instant the switch closes)?

Question 3 of 5

A battery \(\mathcal{E} = 24\) V is connected to \(R = 6\;\Omega\) and \(L = 12\) mH in series. After a long time, how much energy is stored in the inductor?

Question 4 of 5

During current decay in an LR circuit, what fraction of the initial current remains after two time constants?

Question 5 of 5

If the resistance in an LR circuit is doubled while \(L\) stays constant, what happens to the time constant and maximum current?