01 / 21

Resistor-Capacitor
RC Circuits

Understand how capacitors charge and discharge through resistors, master the time constant \(\tau = RC\), and solve AP-level circuit problems.

AP Physics 2

What Is an RC Circuit?

An RC circuit contains a resistor (\(R\)) and a capacitor (\(C\)) connected in series with a voltage source. When the switch closes, current flows and the capacitor gradually stores charge: this is charging. When the source is removed, the capacitor releases its stored energy: this is discharging.

\(+\)
\(-\)
\(V\)
\(S\)
\(R\)
\(C\)
\(I\)

Key Definitions

Resistance \(R\)
Opposition to current flow, measured in ohms (\(\Omega\)). Higher \(R\) means slower charging.
Capacitance \(C\)
Ability to store charge, measured in farads (F). \(C = Q / V\): more farads means more charge per volt.
Time Constant \(\tau\)
The product \(\tau = RC\), measured in seconds. It sets the pace for how quickly the circuit responds.

Why Do RC Circuits Matter?

RC circuits are everywhere in electronics and physics. They create time delays, filter signals, and smooth voltages. Understanding them unlocks a whole class of real-world applications.

Camera Flash
A capacitor charges slowly through \(R\), then discharges rapidly to produce a bright flash.
Heart Defibrillator
Stores energy in a capacitor, then delivers it in a controlled pulse to restore heart rhythm.
Audio Filters
RC circuits filter out high or low frequencies, shaping the sound in speakers and amplifiers.

Charging: Core Equations

1
Voltage: \( V_C(t) = V_0 \left(1 - e^{-t/RC}\right) \)
2
Current: \( I(t) = \dfrac{V_0}{R}\, e^{-t/RC} \)
3
Charge: \( Q(t) = C V_0 \left(1 - e^{-t/RC}\right) \)

Charging Curves

Discharging: Core Equations

1
Voltage: \( V_C(t) = V_0\, e^{-t/RC} \)
2
Current: \( I(t) = -\dfrac{V_0}{R}\, e^{-t/RC} \) (negative: reversed direction)
3
Charge: \( Q(t) = C V_0\, e^{-t/RC} \)

Charging vs Discharging

Property Charging Discharging
\(V_C(t)\) \(V_0(1 - e^{-t/\tau})\) \(V_0\, e^{-t/\tau}\)
\(I(t)\) \(\frac{V_0}{R}\, e^{-t/\tau}\) \(-\frac{V_0}{R}\, e^{-t/\tau}\)
At \(t = 0\) \(V_C = 0,\; I = V_0/R\) \(V_C = V_0,\; I = -V_0/R\)
At \(t = \tau\) \(V_C \approx 0.63\,V_0\) \(V_C \approx 0.37\,V_0\)
As \(t \to \infty\) \(V_C \to V_0,\; I \to 0\) \(V_C \to 0,\; I \to 0\)

Energy in a Capacitor

A charged capacitor stores energy in its electric field. The energy can be expressed in three equivalent forms:

Form 1
\( U = \frac{1}{2}CV^2 \)
Form 2
\( U = \frac{Q^2}{2C} \)
Form 3
\( U = \frac{1}{2}QV \)

How to Solve RC Problems

1
Identify the mode: Is the capacitor charging or discharging? This determines which equation set to use.
2
Find \(\tau = RC\): Multiply resistance (in \(\Omega\)) by capacitance (in F). Convert units if needed (e.g., \(\mu\text{F} = 10^{-6}\) F, \(k\Omega = 10^3\,\Omega\)).
3
Pick the right equation: Choose voltage, current, or charge equation depending on what the problem asks for.
4
Substitute and solve: Plug in \(V_0\), \(R\), \(C\), and \(t\). Simplify the exponential.
5
Check boundary conditions: Does your answer make sense at \(t = 0\) and \(t \to \infty\)?

Example 1: Charging Voltage

A \(5\,\text{k}\Omega\) resistor is in series with a \(20\,\mu\text{F}\) capacitor and a \(12\,\text{V}\) battery. Find the capacitor voltage at \(t = 0.1\,\text{s}\).

1
Compute \(\tau\): \(\tau = RC = (5 \times 10^3)(20 \times 10^{-6}) = 0.1\) s
2
Apply charging formula: \(V_C = V_0(1 - e^{-t/\tau}) = 12(1 - e^{-0.1/0.1})\)
3
Simplify: \(V_C = 12(1 - e^{-1}) = 12(1 - 0.368) = 12(0.632)\)

Example 2: Discharging Current

A capacitor charged to \(9\,\text{V}\) discharges through a \(2\,\text{k}\Omega\) resistor. \(C = 50\,\mu\text{F}\). Find the current at \(t = 0.2\,\text{s}\).

1
Compute \(\tau\): \(\tau = (2000)(50 \times 10^{-6}) = 0.1\) s
2
Initial current: \(I_0 = -V_0 / R = -9 / 2000 = -4.5\) mA
3
Discharge formula: \(I(t) = I_0\, e^{-t/\tau} = -4.5 \times e^{-0.2/0.1} = -4.5 \times e^{-2}\)

Example 3: Time to Reach a Target

A \(10\,\text{V}\) source charges a capacitor through \(R = 1\,\text{k}\Omega\), \(C = 100\,\mu\text{F}\). How long until \(V_C = 8\,\text{V}\)?

1
Set up: \(8 = 10(1 - e^{-t/\tau})\), so \(e^{-t/\tau} = 1 - 0.8 = 0.2\)
2
Take natural log: \(-t/\tau = \ln(0.2) = -1.609\)
3
Find \(\tau\): \(\tau = (1000)(100 \times 10^{-6}) = 0.1\) s
4
Solve for \(t\): \(t = 1.609 \times 0.1 = 0.161\) s

Discharging Curves

Common Mistakes

✕ Wrong Equation
Using the charging formula \((1 - e^{-t/\tau})\) when the capacitor is discharging, or vice versa. Always identify the mode first.
✕ Unit Mismatch
Forgetting to convert \(k\Omega\) to \(\Omega\) or \(\mu\text{F}\) to F before computing \(\tau\). A factor of \(10^3\) or \(10^{-6}\) can ruin your answer.
✕ Confusing 63% and 37%
At \(t = \tau\), a charging capacitor reaches 63% of max, and a discharging capacitor drops to 37%. Mixing these up is a frequent error.

Summary Reference Table

Quantity Charging Discharging
\(V_C(t)\) \(V_0(1 - e^{-t/\tau})\) \(V_0\,e^{-t/\tau}\)
\(I(t)\) \(\frac{V_0}{R}e^{-t/\tau}\) \(-\frac{V_0}{R}e^{-t/\tau}\)
\(Q(t)\) \(CV_0(1-e^{-t/\tau})\) \(CV_0\,e^{-t/\tau}\)
Time constant \(\tau = RC\)
Energy stored \(U = \frac{1}{2}CV^2\)
At \(t = \tau\) 63% of max 37% of initial
Fully done \(t \approx 5\tau\)

Question 1 of 5

What is the time constant \(\tau\) for a circuit with \(R = 4\,\text{k}\Omega\) and \(C = 25\,\mu\text{F}\)?

Question 2 of 5

A capacitor charges from a \(20\,\text{V}\) source with \(\tau = 0.5\,\text{s}\). What is \(V_C\) at \(t = 0.5\,\text{s}\)?

Question 3 of 5

During discharging, which statement is true about the current through the resistor?

Question 4 of 5

If you double the resistance in an RC circuit while keeping \(C\) constant, what happens to the time constant?

Question 5 of 5

A \(100\,\mu\text{F}\) capacitor is fully charged to \(6\,\text{V}\). How much energy is stored in the capacitor?