01 / 21

Reaction Quotient &
Equilibrium Constant

Master the relationship between \( Q \) and \( K \) to predict which direction a reaction will shift and whether a system has reached equilibrium.

AP Chemistry

What is Chemical Equilibrium?

In a reversible reaction, equilibrium is the state where the forward and reverse reactions proceed at equal rates. The concentrations of reactants and products remain constant over time: not because the reactions stop, but because they balance each other out.

Time Rate Equilibrium Forward rate Reverse rate

The Equilibrium Constant \( K \)

For a general reversible reaction:

\( K \gg 1 \)
Products are heavily favored at equilibrium. The reaction "lies to the right."
\( K \approx 1 \)
Neither side is strongly favored. Comparable amounts of reactants and products.
\( K \ll 1 \)
Reactants are heavily favored at equilibrium. The reaction "lies to the left."

Forms of \( K \): \( K_c \) vs \( K_p \)

\( K_c \)
Uses molar concentrations (mol/L). Valid for reactions in solution or gas phase.
\( K_p \)
Uses partial pressures (atm). Only for gas-phase reactions.

The Reaction Quotient \( Q \)

The reaction quotient \( Q \) has the same mathematical form as \( K \), but it is calculated using the current concentrations or pressures at any point in time: not just at equilibrium.

Think of \( Q \) as a snapshot: it tells you where the system is right now, while \( K \) tells you where it wants to be.

Comparing \( Q \) and \( K \): Predicting Direction

\( K \) \( Q < K \) Shift RIGHT (toward products) \( Q > K \) Shift LEFT (toward reactants) \( Q = K \): At Equilibrium
1
\( Q < K \): Too few products relative to equilibrium. Reaction shifts forward (to the right) to make more products.
2
\( Q = K \): The system is at equilibrium. No net shift occurs.
3
\( Q > K \): Too many products relative to equilibrium. Reaction shifts reverse (to the left) to consume products.

\( Q \) vs \( K \): The Key Distinction

\( Q \) (Reaction Quotient) \( K \) (Equilibrium Constant)
When measured Any point in time Only at equilibrium
Value Changes as reaction proceeds Fixed at a given temperature
Purpose Predict direction of shift Describe equilibrium position
Formula Same expression as \( K \) Same expression as \( Q \)
Depends on Current concentrations Temperature only

How to Apply the \( Q \) vs \( K \) Test

1
Write the balanced equation and identify the equilibrium expression for \( K \).
2
Identify the given value of \( K \) at the specified temperature.
3
Substitute the current concentrations (or pressures) into the same expression to calculate \( Q \).
4
Compare \( Q \) to \( K \): if \( Q < K \), shift right; if \( Q > K \), shift left; if \( Q = K \), at equilibrium.
5
State the conclusion in terms of which species increase or decrease.

Example 1: Calculating \( Q \)

1
Write the expression: \( Q_c = \frac{[\text{NH}_3]^2}{[\text{N}_2][\text{H}_2]^3} \)
2
Substitute: \( Q_c = \frac{(0.30)^2}{(0.10)(0.20)^3} = \frac{0.090}{0.00080} = 112.5 \)
3
Compare: \( Q_c = 112.5 \) vs \( K_c = 0.50 \). Since \( Q \gg K \), the system has too many products.
4
Conclusion: The reaction shifts to the left (reverse), decomposing \(\text{NH}_3\) back into \(\text{N}_2\) and \(\text{H}_2\).

Example 2: \( Q < K \) Scenario

1
Expression: \( Q_c = \frac{[\text{CO}_2][\text{H}_2]}{[\text{CO}][\text{H}_2\text{O}]} \)
2
Calculate: \( Q_c = \frac{(0.50)(0.50)}{(1.0)(1.0)} = 0.25 \)
3
Compare: \( Q_c = 0.25 < K_c = 5.10 \). The system has too few products.
4
Conclusion: Reaction shifts to the right (forward), producing more \(\text{CO}_2\) and \(\text{H}_2\).

Example 3: Using \( K_p \) with Pressures

1
Expression: \( Q_p = \frac{(P_{\text{SO}_3})^2}{(P_{\text{SO}_2})^2 (P_{\text{O}_2})} \)
2
Calculate: \( Q_p = \frac{(3.0)^2}{(2.0)^2(1.5)} = \frac{9.0}{6.0} = 1.5 \)
3
Compare: \( Q_p = 1.5 > K_p = 0.14 \). Since \( Q > K \), there are too many products.
4
Conclusion: Shift left: \(\text{SO}_3\) decomposes back to \(\text{SO}_2\) and \(\text{O}_2\).

How Temperature Affects \( K \)

\( K \) is constant only at a given temperature. Changing temperature changes the value of \( K \) because it changes the equilibrium position.

Exothermic Reaction
\( \Delta H < 0 \): Increasing \( T \) decreases \( K \). Heat is a "product": adding heat shifts equilibrium left.
Endothermic Reaction
\( \Delta H > 0 \): Increasing \( T \) increases \( K \). Heat is a "reactant": adding heat shifts equilibrium right.

Heterogeneous Equilibria

When reactants and products are in different phases, pure solids and pure liquids are excluded from the equilibrium expression because their effective concentrations are constant.

1
Pure solids \((s)\): omit from expression
2
Pure liquids \((l)\): omit from expression
3
Aqueous \((aq)\) and gas \((g)\): always include

Manipulating Equilibrium Expressions

When you modify a balanced equation, \( K \) changes predictably:

1
Reverse the reaction: \( K_{\text{reverse}} = \frac{1}{K_{\text{forward}}} \)
2
Multiply coefficients by \( n \): \( K_{\text{new}} = K^n \)
3
Add reactions together: \( K_{\text{overall}} = K_1 \times K_2 \)

Common Mistakes to Avoid

✕ Including Solids/Liquids
Pure solids and liquids must be omitted from \( K \) and \( Q \) expressions. Only gases and aqueous species appear.
✕ Confusing \( Q \) and \( K \)
\( Q \) uses current concentrations; \( K \) uses equilibrium concentrations. They share the same formula but measure different states.
✕ Wrong Shift Direction
When \( Q > K \), the reaction shifts left (not right). Think: "too many products, so consume them."
✕ Forgetting Exponents
Each concentration must be raised to the power of its stoichiometric coefficient. Forgetting this gives the wrong \( Q \) or \( K \) value.
✕ Changing \( K \) Without \( T \)
Adding a catalyst or changing pressure does not change \( K \). Only temperature changes \( K \).

Summary: The Complete Picture

Condition Relationship Shift Direction What Happens
Too few products \( Q < K \) Forward (right) Products increase
At equilibrium \( Q = K \) No shift No net change
Too many products \( Q > K \) Reverse (left) Reactants increase
\( Q < K \) Shift right \( Q = K \) Equilibrium \( Q > K \) Shift left Increasing \( Q \)

Question 1 of 5

For the reaction \( \text{A}(g) \rightleftharpoons 2\text{B}(g) \), if \( K_c = 4.0 \) and the current concentrations are \( [\text{A}] = 1.0 \text{ M} \) and \( [\text{B}] = 1.0 \text{ M} \), which direction will the reaction shift?

Question 2 of 5

Which of the following changes will alter the value of the equilibrium constant \( K \)?

Question 3 of 5

For \( \text{CaCO}_3(s) \rightleftharpoons \text{CaO}(s) + \text{CO}_2(g) \), what is the correct equilibrium expression?

Question 4 of 5

If the equilibrium constant for a reaction is \( K = 50 \), what is the value of \( K \) for the reverse reaction?

Question 5 of 5

For an endothermic reaction at equilibrium, what happens to \( K \) when the temperature is increased?