01 / 21

Pre-Equilibrium
Approximation

Master the technique of assuming a fast, reversible first step reaches equilibrium before the slow step proceeds: derive rate laws for complex multi-step mechanisms.

AP Chemistry

What is a Reaction Mechanism?

Most chemical reactions do not occur in a single step. Instead, they proceed through a series of elementary steps that together describe the molecular pathway from reactants to products. Each elementary step has its own molecularity and rate constant.

Elementary Step
A single molecular event with a rate law written directly from its stoichiometry.
Overall Reaction
The sum of all elementary steps: intermediates cancel; rate law must be determined experimentally.

The Problem with Intermediates

When the rate-determining step involves a reactive intermediate (a species produced in an earlier step but not present in the overall equation), the rate law will contain that intermediate's concentration. Since intermediates are not stable reactants, we cannot leave them in the final rate law.

Two common strategies exist: the steady-state approximation and the pre-equilibrium approximation. This lesson focuses on the latter.

Core Idea: Fast Equilibrium Before Slow Step

Step 1 (Fast, reversible)
\(\text{A} + \text{B} \rightleftharpoons \text{I}\)
fast Step 2 (Slow, RDS)
\(\text{I} + \text{C} \rightarrow \text{Products}\)
Pre-equilibrium assumption Step 1 reaches equilibrium before Step 2 consumes I appreciably

Deriving the Rate Law

1
Write the rate law for the slow step: Since Step 2 is rate-determining, \(\text{rate} = k_2[\text{I}][\text{C}]\).
2
Write the equilibrium expression for Step 1: \(K_{eq} = \dfrac{k_1}{k_{-1}} = \dfrac{[\text{I}]}{[\text{A}][\text{B}]}\).
3
Solve for [I]: \([\text{I}] = \dfrac{k_1}{k_{-1}}[\text{A}][\text{B}]\).
4
Substitute back: \(\text{rate} = \dfrac{k_1 k_2}{k_{-1}}[\text{A}][\text{B}][\text{C}]\).

The \(K_{eq}\) Connection

The equilibrium constant for the fast step is defined as the ratio of the forward to reverse rate constants:

\(k_1\)
Forward rate constant of the fast step.
\(k_{-1}\)
Reverse rate constant of the fast step.
\(k_2\)
Rate constant of the slow (rate-determining) step.

When to Use Pre-Equilibrium

The pre-equilibrium approximation is valid when specific conditions about the mechanism are met. Look for these signals in exam problems:

1
The first step is explicitly labeled "fast" and "reversible" (shown with \(\rightleftharpoons\)), while a later step is labeled "slow."
2
The slow step involves an intermediate that appears in the products of the fast step.
3
\(k_1, k_{-1} \gg k_2\): The forward and reverse rates of Step 1 are both much larger than the rate of Step 2.

Pre-Equilibrium vs Steady-State

Pre-Equilibrium Steady-State
Key assumption Fast step reaches equilibrium \(\dfrac{d[\text{I}]}{dt} \approx 0\)
Condition on rates \(k_{-1} \gg k_2\) \[\text{I}\] is small and steady
When to use Step 1 is clearly "fast, reversible" No step is overwhelmingly fast
Math complexity Simpler: algebra with \(K_{eq}\) Harder: solve \(d[\text{I}]/dt = 0\)
Result Rate contains \(K_{eq} \cdot k_2\) Rate law is more complex, often involving a sum in the denominator (e.g., \(k_{-1}+k_2\))

How to Apply: Step-by-Step

1
Identify the slow step and write its rate law directly from its stoichiometry.
2
Check for intermediates in that rate law. If [intermediate] appears, proceed to eliminate it.
3
Write the equilibrium expression for the fast, reversible step: \(K_{eq} = \text{products}/\text{reactants}\).
4
Solve for [intermediate] in terms of reactant concentrations.
5
Substitute back into the rate law from Step 1. Combine all constants into one \(k_{\text{obs}}\).
6
Verify: The final rate law should contain only reactant (or catalyst) concentrations, not intermediates.

Energy Profile of a Pre-Equilibrium Mechanism

Reaction Progress Energy
\(\text{A} + \text{B}\)
Intermediate I Products
\(E_{a1}\)
(small)
\(E_{a2}\)
(large: RDS)
Step 1: Fast Step 2: Slow

Example 1: \(\text{NO}_2\) and \(\text{CO}\)

1
Rate from slow step: \(\text{rate} = k_2[\text{NO}_3][\text{CO}]\). The intermediate is \(\text{NO}_3\).
2
Equilibrium for Step 1: \(K_{eq} = \dfrac{[\text{NO}_3][\text{NO}]}{[\text{NO}_2]^2}\), so \([\text{NO}_3] = \dfrac{K_{eq}[\text{NO}_2]^2}{[\text{NO}]}\).
3
Substitute: \(\text{rate} = \dfrac{k_1 k_2}{k_{-1}} \cdot \dfrac{[\text{NO}_2]^2[\text{CO}]}{[\text{NO}]}\).

Example 2: Ozone Decomposition

1
Rate from slow step: \(\text{rate} = k_2[\text{O}_3][\text{O}]\). Intermediate: \(\text{O}\) (atomic oxygen).
2
Equilibrium: \(K_{eq} = \dfrac{[\text{O}_2][\text{O}]}{[\text{O}_3]}\), so \([\text{O}] = \dfrac{K_{eq}[\text{O}_3]}{[\text{O}_2]}\).
3
Final rate law: \(\text{rate} = \dfrac{k_1 k_2}{k_{-1}} \cdot \dfrac{[\text{O}_3]^2}{[\text{O}_2]}\).

Example 3: Hydrogen-Bromine System

1
Rate from slow step: \(\text{rate} = k_2[\text{Br}][\text{H}_2]\). Intermediate: \(\text{Br}\).
2
Equilibrium: \(K_{eq} = \dfrac{[\text{Br}]^2}{[\text{Br}_2]}\), so \([\text{Br}] = \sqrt{K_{eq}[\text{Br}_2]} = \sqrt{\dfrac{k_1}{k_{-1}}} \cdot [\text{Br}_2]^{1/2}\).
3
Final rate law: \(\text{rate} = k_2\sqrt{\dfrac{k_1}{k_{-1}}} \cdot [\text{Br}_2]^{1/2}[\text{H}_2]\).

Concentration vs Time: Intermediate Behavior

Time Concentration Pre-equilibrium zone: [I] tracks reactant concentration [Reactant] [Intermediate] [Product]

Common Mistakes to Avoid

Leaving intermediates in the rate law
The final rate law must only contain reactants (and catalysts). Always substitute out any intermediate using the equilibrium expression.
Writing rate law from the overall equation
Rate laws for multi-step mechanisms cannot be written from the balanced equation. Use the slow step's stoichiometry only.
Wrong \(K_{eq}\) expression
Remember: \(K_{eq}\) is products over reactants for the fast step specifically, not the overall reaction.

Summary of Pre-Equilibrium Method

Aspect Details
Applies when First step is fast and reversible; later step is slow
Key assumption Step 1 reaches equilibrium: \(K_{eq} = k_1 / k_{-1}\)
Goal Eliminate [intermediate] from the rate law
Procedure Solve \(K_{eq}\) for [I], substitute into rate of slow step
Observed \(k\) \(k_{\text{obs}} = \frac{k_1 k_2}{k_{-1}}\)
Validity check Final rate law has no intermediates, matches experiment

Question 1 of 5

For the mechanism:
Step 1 (fast): \(\text{A} + \text{B} \rightleftharpoons \text{I}\)
Step 2 (slow): \(\text{I} \rightarrow \text{P}\)

What is the predicted rate law?

Question 2 of 5

In the pre-equilibrium approximation, which condition must hold for the technique to be valid?

Question 3 of 5

For ozone decomposition:
Step 1 (fast): \(\text{O}_3 \rightleftharpoons \text{O}_2 + \text{O}\)
Step 2 (slow): \(\text{O}_3 + \text{O} \rightarrow 2\text{O}_2\)

What is the overall order of the derived rate law?

Question 4 of 5

Step 1 (fast): \(\text{Br}_2 \rightleftharpoons 2\text{Br}\)
Step 2 (slow): \(\text{Br} + \text{H}_2 \rightarrow \text{HBr} + \text{H}\)

Why does the final rate law have a half-order dependence on \([\text{Br}_2]\)?

Question 5 of 5

A student derives \(\text{rate} = k[\text{A}][\text{I}]\) for a mechanism. The instructor says this is incomplete. What must the student do next?