01 / 21
pH
\(\text{p}K_a\)

pH and \( \text{p}K_a \)

Master the logarithmic scales that describe acidity, basicity, and acid-base equilibrium strength in aqueous solutions.

AP Chemistry

What is pH?

pH is the negative base-10 logarithm of the hydrogen ion concentration in a solution. It tells you how acidic or basic an aqueous solution is on a scale from 0 to 14.

Because pH uses a logarithmic scale, each whole-number change represents a tenfold change in \([\text{H}^+]\). A solution at pH 3 has ten times more \(\text{H}^+\) than one at pH 4.

The pH Scale Visualized

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Neutral ACIDIC
High \([\text{H}^+]\)
BASIC
Low \([\text{H}^+]\)
Stomach acid Coffee Soap Bleach

pOH and the Water Constant

Just as pH measures \([\text{H}^+]\), pOH measures hydroxide ion concentration. The two are linked by the autoionization of water:

pOH Definition
\( \text{pOH} = -\log[\text{OH}^-] \)
Key Relationship
\( \text{pH} + \text{pOH} = 14 \) at 25 °C
\(K_w\)
\( K_w = [\text{H}^+][\text{OH}^-] = 1.0 \times 10^{-14} \)

Introducing \(K_a\) and \(\text{p}K_a\)

For a generic weak acid \(\text{HA}\) dissociating in water:

\(K_a\) is the acid dissociation constant: it quantifies how readily an acid donates a proton. A larger \(K_a\) means a stronger acid.

Acid Strength on the \(\text{p}K_a\) Scale

-10 -2 2 5 10 16
\( \text{p}K_a \)
Strong Acids
\(\text{HCl}, \text{HNO}_3\)
Weak Acids
\(\text{CH}_3\text{COOH}, \text{HF}\)
Very Weak
\(\text{H}_2\text{O}, \text{NH}_4^+\)
Stronger acid Weaker acid HI
\( \text{p}K_a \approx -10 \)
CH3COOH
\( \text{p}K_a = 4.76 \)
\(\text{NH}_4^+\)
\( \text{p}K_a = 9.25 \)

The Henderson-Hasselbalch Equation

The most important equation linking pH and \(\text{p}K_a\) is the Henderson-Hasselbalch equation, used for buffer solutions:

1
When \([\text{A}^-] = [\text{HA}]\): the log term is 0, so \(\text{pH} = \text{p}K_a\).
2
When \([\text{A}^-] > [\text{HA}]\): \(\text{pH} > \text{p}K_a\) (more basic).
3
When \([\text{A}^-] < [\text{HA}]\): \(\text{pH} < \text{p}K_a\) (more acidic).

\(K_b\) and \(\text{p}K_b\) for Bases

Bases have their own equilibrium constant. For a weak base \(\text{B}\) accepting a proton from water:

pH vs \(\text{p}K_a\): Key Distinction

pH \( \text{p}K_a \)
Measures \([\text{H}^+]\) in a solution Strength of an acid
Depends on Concentration and acid identity Acid identity only
Changes with dilution? Yes No (constant at given T)
Formula \(-\log[\text{H}^+]\) \(-\log K_a\)
Lower value means More acidic solution Stronger acid

How to Calculate pH: Step by Step

1
Identify the acid or base. Is it strong (complete dissociation) or weak (equilibrium)?
2
Strong acid/base: Use \(\text{pH} = -\log[\text{H}^+]\) directly from the given concentration.
3
Weak acid: Set up an ICE table, solve \(K_a = \frac{x^2}{C - x}\), then \(\text{pH} = -\log x\).
4
Buffer: Apply Henderson-Hasselbalch: \(\text{pH} = \text{p}K_a + \log\!\left(\frac{[\text{A}^-]}{[\text{HA}]}\right)\).
5
Verify: Does the pH make sense? Acidic solutions < 7, basic > 7.

Example 1: Strong Acid pH

Find the pH of a 0.0050 M HCl solution.

1
Identify: HCl is a strong acid: it dissociates completely.
2
Find \([\text{H}^+]\): Since 100% dissociation, \([\text{H}^+] = 0.0050\;\text{M} = 5.0 \times 10^{-3}\;\text{M}\).
3
Calculate pH: \(\text{pH} = -\log(5.0 \times 10^{-3}) = -(\log 5.0 + \log 10^{-3})\).

Example 2: Weak Acid pH from \(K_a\)

Find the pH of 0.10 M acetic acid (\(K_a = 1.8 \times 10^{-5}\)).

1
ICE setup: Let \(x = [\text{H}^+]\) at equilibrium. Then \(K_a = \frac{x^2}{0.10 - x}\).
2
Approximation: Since \(K_a \ll C\), assume \(0.10 - x \approx 0.10\). So \(x^2 = (1.8 \times 10^{-5})(0.10) = 1.8 \times 10^{-6}\).
3
Solve: \(x = \sqrt{1.8 \times 10^{-6}} = 1.34 \times 10^{-3}\;\text{M}\).

Example 3: Buffer pH

Find the pH of a buffer containing 0.25 M \(\text{CH}_3\text{COOH}\) and 0.40 M \(\text{CH}_3\text{COO}^-\) (\(\text{p}K_a = 4.76\)).

1
Compute the ratio: \(\frac{0.40}{0.25} = 1.60\).
2
Take the log: \(\log(1.60) = 0.204\).
3
Add: \( \text{pH} = 4.76 + 0.204 = 4.96 \).

Titration Curve and the Half-Equivalence Point

pH 0 2 4 7 10 13 Volume of NaOH added (mL) 0 12.5 25 37.5 50
\( \text{pH} = \text{p}K_a \)
Equivalence point pH 7

Common Mistakes to Avoid

✕ Confusing pH and \(\text{p}K_a\)
pH changes with concentration; \(\text{p}K_a\) is an intrinsic property of the acid. Diluting acetic acid changes its pH but not its \(\text{p}K_a\).
✕ Forgetting the negative sign
\(\text{pH} = -\log[\text{H}^+]\). Omitting the negative gives a nonsensical result: for example, \(\log(10^{-3}) = -3\), so without the minus you get \(-3\) instead of \(3\).
✕ Using H-H for strong acids
Henderson-Hasselbalch applies only to weak acid buffers. Strong acids dissociate completely: no equilibrium to balance.

Summary of Key Formulas

Quantity Formula What It Tells You
pH \(-\log[\text{H}^+]\) Acidity of a solution
pOH \(-\log[\text{OH}^-]\) Basicity of a solution
\(\text{p}K_a\) \(-\log K_a\) Acid strength (intrinsic)
\(\text{p}K_b\) \(-\log K_b\) Base strength (intrinsic)
Buffer pH \(\text{p}K_a + \log\!\left(\frac{[\text{A}^-]}{[\text{HA}]}\right)\) pH of a buffer mixture
Conjugate link \(\text{p}K_a + \text{p}K_b = 14\) Relates acid/base pair

Question 1 of 5

What is the pH of a 0.001 M \(\text{HNO}_3\) solution?

Question 2 of 5

Acetic acid has \(K_a = 1.8 \times 10^{-5}\). What is its \(\text{p}K_a\)?

Question 3 of 5

A buffer is made with equal concentrations of a weak acid (\(\text{p}K_a = 6.35\)) and its conjugate base. What is the pH?

Question 4 of 5

During a titration of a weak acid with a strong base, at the half-equivalence point, which statement is correct?

Question 5 of 5

If an acid has \(\text{p}K_a = 3.2\), what is the \(\text{p}K_b\) of its conjugate base at 25 °C?