01 / 20

Zeros of Polynomials
to Construct Graphs

Learn to identify zeros from factored polynomials and use them to sketch accurate graphs of polynomial functions.

Algebra 1

What Is a Zero of a Polynomial?

A zero (also called a root or x-intercept) of a polynomial \( f(x) \) is any value \( x = r \) where \( f(r) = 0 \). Graphically, it is the point where the curve crosses or touches the x-axis.

Zeros Live on the x-Axis

Each zero corresponds to a point \( (r, 0) \) on the graph. Between zeros, the polynomial is either above (\( f(x) > 0 \)) or below (\( f(x) < 0 \)) the x-axis.

Factored Form Reveals the Zeros

When a polynomial is written in factored form, each factor tells you a zero. Apply the Zero Product Property: if \( a \cdot b = 0 \), then \( a = 0 \) or \( b = 0 \).

\( f(x) = x(x-4) \)
Zeros: \( x = 0 \) and \( x = 4 \)
\( g(x) = (x+1)(x-2)(x-5) \)
Zeros: \( x = -1, \; 2, \; 5 \)
\( h(x) = -2(x+3)(x-1) \)
Zeros: \( x = -3 \) and \( x = 1 \)

The Zero Product Property

This property is the bridge between algebra and graphing. Once you know the factored form, you know where the graph touches or crosses the x-axis: at each \( x = r_k \).

End Behavior Completes the Picture

To sketch a polynomial graph, you need two pieces of information: where it crosses zero (the zeros) and where it goes at the extremes (end behavior). End behavior depends on the degree and the sign of the leading coefficient.

Even Degree, Positive Lead
Both ends go up: as \( x \to \pm\infty \), \( f(x) \to +\infty \)
Even Degree, Negative Lead
Both ends go down: as \( x \to \pm\infty \), \( f(x) \to -\infty \)
Odd Degree, Positive Lead
Left down, right up: opposite ends
Odd Degree, Negative Lead
Left up, right down: opposite ends

Cross vs Touch: Multiplicity

A zero's multiplicity determines whether the graph crosses or merely touches the x-axis at that point.

Odd Multiplicity
The graph crosses the x-axis. Example: \( (x - 2)^1 \) or \( (x - 2)^3 \)
Even Multiplicity
The graph touches and bounces off the x-axis. Example: \( (x - 2)^2 \)

Step-by-Step: Sketch from Zeros

1
Factor completely. Write \( f(x) \) as a product of linear factors (if possible).
2
Find the zeros. Set each factor equal to zero and solve for \( x \).
3
Plot the zeros on the x-axis and note each multiplicity (cross or bounce).
4
Determine end behavior from the degree and leading coefficient sign.
5
Test sign intervals. Pick a test point between each pair of consecutive zeros to see if \( f \) is positive or negative.
6
Connect the dots with a smooth curve respecting end behavior, zeros, and signs.

Example 1: \( f(x) = (x+2)(x-1)(x-3) \)

Example 2: \( g(x) = -(x+1)^2(x-2) \)

Example 3: \( h(x) = x^2(x-4) \)

Common Mistakes to Avoid

✕ Wrong Sign on Zero
From factor \( (x + 3) \), the zero is \( x = -3 \), not \( x = 3 \). The sign flips when you solve \( x + 3 = 0 \).
✕ Ignoring the Leading Coefficient
A negative leading coefficient flips the graph. \( -x^2 \) opens down, not up. Always check the sign.
✕ Forgetting Multiplicity
A repeated factor like \( (x-1)^2 \) means the graph touches but does not cross at \( x = 1 \). Skipping this gives the wrong shape.

Sign Analysis Between Zeros

After plotting zeros, pick a test value in each interval and evaluate the sign of \( f \). The sign tells you whether the graph is above or below the x-axis in that interval.

Interval Test Point Sign of \( f(x) \) Position
\( x < -2 \) \( x = -3 \) Negative Below x-axis
\( -2 < x < 1 \) \( x = 0 \) Positive Above x-axis
\( 1 < x < 3 \) \( x = 2 \) Negative Below x-axis
\( x > 3 \) \( x = 4 \) Positive Above x-axis

Summary Cheat Sheet

Feature What to Look For Effect on Graph
Zeros Set each factor equal to \(0\) x-intercepts
Odd Multiplicity Factor exponent is 1, 3, 5... Graph crosses x-axis
Even Multiplicity Factor exponent is 2, 4, 6... Graph bounces off x-axis
End Behavior Degree + leading coefficient Direction at far left/right
Sign Intervals Test points between zeros Above or below x-axis

Putting It All Together

When you see a factored polynomial, think of it as a recipe for a graph. The factors give you the zeros (where to mark on the x-axis), the exponents tell you how the curve behaves at each zero, and the leading term tells you how it all starts and ends.

1
Factors → x-intercepts (plot as dots on the x-axis)
2
Exponents → cross (odd) or bounce (even) at each zero
3
Leading term → end behavior (both ends or opposite ends)
4
Test points → fill in the curve above/below the axis

Question 1 of 5

What are the zeros of \( f(x) = (x - 5)(x + 2) \)?

Question 2 of 5

For \( g(x) = (x - 1)^2(x + 3) \), what happens at \( x = 1 \)?

Question 3 of 5

A polynomial \( f(x) = -x^3 + \ldots \) has a negative leading coefficient and odd degree. What is its end behavior?

Question 4 of 5

How many zeros (x-intercepts) can a degree \( 4 \) polynomial have at most?

Question 5 of 5

Given \( f(x) = x(x-2)(x+4) \), what is the sign of \( f(x) \) on the interval \( (0, 2) \)?