01 / 20

Choosing Appropriate
Levels of Accuracy

Learn when to round, how many digits to keep, and why precision and significant figures matter in real-world measurements.

Algebra 1

What Is Accuracy?

Accuracy describes how close a measured or calculated value is to the true value. When we report a quantity, we must choose how many digits to include: too few and we lose useful information; too many and we imply a precision we never actually had.

Precision vs Accuracy

Accurate & Precise Accurate, Not Precise Precise, Not Accurate Bulls-eye = true value

Understanding Significant Figures

Significant figures (sig figs) tell us how many digits in a number are meaningful based on the measurement tool. They are the primary way we communicate the level of accuracy in a reported quantity.

\(3.06\)
3 significant figures: the zero between 3 and 6 counts
\(0.0042\)
2 significant figures: leading zeros are placeholders only
\(1500\)
Ambiguous: could be 2, 3, or 4 sig figs depending on context

The Core Rule of Accuracy

\(12.5 \text{ cm}\)
3 sig figs
\(\times\)
\(3.2 \text{ cm}\)
2 sig figs
\(=\)
\(40. \text{ cm}^2\)
2 sig figs Result limited by fewest sig figs

Multiplication/Division vs Addition/Subtraction

Multiplication & Division
Round the result to the same number of significant figures as the measurement with the fewest sig figs.

Example: \( 4.56 \times 1.4 = 6.384 \to \) \(6.4\) (2 sig figs)
Addition & Subtraction
Round the result to the same number of decimal places as the measurement with the fewest decimal places.

Example: \( 12.11 + 18.0 = 30.11 \to \) \(30.1\) (1 decimal place)

Sig Figs vs Decimal Places

Significant Figures Decimal Places
What it counts All meaningful digits Digits after the decimal point
When to use Multiplication & division Addition & subtraction
Example: \(0.0250\) 3 sig figs 4 decimal places
Example: \(1500\) 2, 3, or 4 (ambiguous) 0 decimal places

Step-by-Step Approach

1
Identify each measurement and note its number of significant figures (or decimal places).
2
Determine the operation: are you multiplying/dividing or adding/subtracting?
3
Find the limiting measurement: the one with the fewest sig figs (for \(\times / \div\)) or fewest decimal places (for \(+ / -\)).
4
Compute the exact result first, then round to match the limiting measurement's accuracy.
5
Ask: does this make sense? Sanity-check that your reported answer reflects what the tool could actually measure.

Example 1: Area of a Garden

A gardener measures the length and width of a rectangular plot:

\(14.5 \text{ m}\)
(3 sig figs)
\(8.2 \text{ m}\)
(2 sig figs)

Example 2: Adding Weights

A chemist weighs three samples on different scales:

Sample A
\( 12.04 \) g (2 decimal places)
Sample B
\( 0.3 \) g (1 decimal place)
Sample C
\( 5.713 \) g (3 decimal places)

Example 3: Speed Calculation

A car travels \(245.8 \text{ km}\) (4 sig figs) in \(3.0 \text{ hours}\) (2 sig figs). What is the speed?

\(245.8 \text{ km}\)
4 sig figs
\(\div\)
\(3.0 \text{ hr}\)
2 sig figs
\(=\)
\(82 \text{ km/hr}\)
2 sig figs
\(\text{Exact: } 81.9333\ldots \to \text{Round to 2 sig figs} \to 82\)

Context Matters

Different fields require different levels of accuracy. A realistic answer matches the tools and context of the problem.

Construction
Nearest \( \frac{1}{16} \) inch or \( \frac{1}{8} \) inch: a tape measure's smallest marking
Chemistry Lab
3 to 4 significant figures: typical analytical balance precision
Astronomy
Sometimes only 1 to 2 sig figs when estimating cosmic distances

Quick Rounding Refresher

1
Locate the rounding digit: the last significant figure you want to keep.
2
Look at the next digit: if it is \( \ge 5 \), round up. If it is \( < 5 \), round down.
3
Drop all digits to the right of the rounding digit (replace with zeros if before the decimal point).

Common Mistakes

✕ Over-Reporting Digits
Writing all 10 digits from a calculator when your ruler only measures to the nearest mm.
✕ Rounding Too Early
Rounding intermediate steps instead of waiting until the final answer, which compounds rounding error.
✕ Mixing Up the Rules
Using "fewest decimal places" for multiplication, or "fewest sig figs" for addition. Each operation has its own rule.

Summary Table

Situation Rule Example
Multiplying / Dividing Match fewest sig figs \( 2.5 \times 3.42 = \) \(8.6\)
Adding / Subtracting Match fewest decimal places \( 6.1 + 3.482 = \) \(9.6\)
Single measurement Report to tool's smallest unit Ruler to mm → report in mm
Real-world context Match the practical need Room dimensions to nearest inch

Question 1 of 5

A student multiplies \( 6.38 \times 2.0 \). The calculator shows \( 12.76 \). What should the student report?

Question 2 of 5

A scientist adds \( 14.2 \) g and \( 0.035 \) g. What is the correctly reported sum?

Question 3 of 5

A tape measure is marked in centimeters (no millimeter marks). You measure a shelf and get about \( 82 \) cm. Which reported value is most appropriate?

Question 4 of 5

How many significant figures does the number \( 0.00340 \) have?

Question 5 of 5

A student calculates \( \frac{50.0}{7} = 7.142857\ldots \) on a calculator. The denominator \( 7 \) is an exact count (not a measurement). How should the answer be reported?