01 / 20

Interpreting Data
from Tables

Master the skill of reading, analyzing, and drawing conclusions from scientific data tables on the ACT Science section.

ACT Science

What Are Data Tables?

A data table is a structured way to organize experimental results. On the ACT Science section, nearly every passage includes at least one table. Learning to read them quickly and accurately is essential for answering questions correctly.

Rows
Each row represents a single trial, sample, or condition in an experiment.
Columns
Each column represents a different variable: one independent, one or more dependent.
Headers
Column headers name the variable and often include units (e.g., "Temp (\(^{\circ}\text{C}\))").

Anatomy of a Data Table

Trial
Temp (\(^{\circ}\text{C}\))
Rate (\(\text{mL/s}\))
1 20 2.4 2 40 5.1 3 60 8.7 4 80 12.0 Column headers Data rows Units in parentheses

Why Tables Matter on the ACT

About 30 to 40 percent of ACT Science questions ask you to locate, compare, or interpret values directly from data tables. These are among the fastest questions to answer: if you can read the table accurately, you earn easy points.

Data Representation
Passages that feature tables and graphs. About 15 questions per test come from these passages.
Research Summaries
Passages describing experiments, always with data tables showing results of each trial.

Independent vs. Dependent Variables

Every data table organizes information around two types of variables. Recognizing them is the first step to interpreting any table correctly.

Independent Variable
The variable the experimenter controls or changes. Usually in the first column (e.g., temperature, concentration, time).
Dependent Variable
The variable that is measured as a result. Usually in the second column or beyond (e.g., reaction rate, mass, population count).

Identifying Trends in Data

Once you know the variables, the next step is to identify the relationship between them. Scan the table column by column and ask: as one variable increases, what happens to the other?

Direct (Positive)
As the independent variable increases, the dependent variable also increases.
Inverse (Negative)
As the independent variable increases, the dependent variable decreases.
No Clear Trend
Values fluctuate with no consistent pattern. The variables may not be related.

Reading vs. Interpolating vs. Extrapolating

Reading Interpolating Extrapolating
Definition Find a value that is directly in the table Estimate a value between two data points Predict a value beyond the data range
Difficulty Low Medium Higher
Example "At \(40^{\circ}\text{C}\), what is the rate?" "At \(50^{\circ}\text{C}\), what is the rate?" "At \(100^{\circ}\text{C}\), what would the rate be?"
Strategy Look up directly Average neighbors Extend the trend

How to Read a Table: Step by Step

1
Read the title and headers. Identify each variable and its units before looking at any data values.
2
Identify independent vs. dependent. The first column is usually the independent variable. All other columns are dependent.
3
Read the question carefully. Note exactly which variable and which row or condition the question asks about.
4
Locate the value. Use the row and column like coordinates: find the row for the given condition, then read across to the correct column.
5
Check units and magnitude. Confirm the answer matches the units and scale in the question before selecting a choice.

Example 1: Direct Reading

Concentration (\(\text{M}\)) Absorbance pH
0.100.254.2
0.200.483.9
0.300.743.5
0.400.973.2

Example 2: Identifying Trends

Altitude (\(\text{km}\)) Temperature (\(^{\circ}\text{C}\)) Pressure (\(\text{atm}\))
015.01.00
22.00.79
4-11.00.61
6-24.00.47
8-37.00.36

Example 3: Interpolation

Time (\(\text{min}\)) Mass Remaining (\(\text{g}\))
0100.0
1082.0
2064.0
3046.0
4028.0

Example 4: Comparing Across Tables

Some ACT passages present two or more tables from different experiments. You must cross-reference values between them.

Table 1: Experiment A
Catalyst X at \(25^{\circ}\text{C}\): reaction rate = \(3.2\text{ mL/s}\)
Table 2: Experiment B
Catalyst Y at \(25^{\circ}\text{C}\): reaction rate = \(5.8\text{ mL/s}\)

Always Check the Units

One of the most overlooked details on the ACT is units. A table might measure temperature in \(^{\circ}\text{C}\) while an answer choice uses \(^{\circ}\text{F}\), or a column might list mass in grams while another uses kilograms.

1
Read the header units in parentheses before reading any data values.
2
Match the question's units to the table's units. If they differ, a conversion may be needed.
3
Watch for powers of ten. A column labeled "Mass (\( \times 10^3 \) g)" means each value is multiplied by 1,000.

Common Mistakes to Avoid

✕ Reading the Wrong Column
Students find the correct row but read a value from an adjacent column. Always trace your finger across.
✕ Ignoring Units
Selecting an answer that has the right number but wrong units, or missing a multiplier in the header.
✕ Confusing Trends
Saying values "increase" when they actually decrease, because you scanned too quickly.
✕ Extrapolating Without Evidence
Predicting a value far outside the table's range without considering that the trend might change.

Summary: Your Table-Reading Toolkit

Skill What You Do When to Use
Direct Reading Find exact value at a given condition Value is in the table
Trend Identification Determine if values increase, decrease, or stay constant "As X increases, what happens to Y?"
Interpolation Estimate between two known data points Requested value is between rows
Extrapolation Extend the trend beyond the data range Requested value is outside the table
Cross-Referencing Compare same condition across two tables Passage has multiple experiments

Question 1 of 5

According to the table, what is the dissolved oxygen concentration at a depth of \(10\text{ m}\)?

Question 2 of 5

Based on the data, as depth increases, light intensity:

Question 3 of 5

At which pH did the plants reach their greatest height?

Question 4 of 5

In Trial 3, the actual volume of gas produced was closest to:

Question 5 of 5

If the trend continues, the bacteria count at 10 hours would most likely be closest to: