Interpreting Data
from Diagrams
Master the skill of reading graphs, tables, and figures to extract trends, compare variables, and answer questions on the ACT Science section.
What Does Interpreting Data Mean?
On the ACT Science section, interpreting data means extracting specific information from visual representations: graphs, tables, scatter plots, and diagrams. You won't need to memorize science facts. Instead, you need to read what the figure shows you.
Common Diagram Types on the ACT
Anatomy of a Line Graph
The Three-Step Reading Process
Reading vs. Extrapolating
Identifying Trends in Data
Reading a Data Table
| Trial | Mass (\(\text{g}\)) | Volume (\(\text{mL}\)) | Density (\(\text{g/mL}\)) |
|---|---|---|---|
| 1 | 10.0 | 5.0 | 2.00 |
| 2 | 20.0 | 10.0 | 2.00 |
| 3 | 30.0 | 14.8 | 2.03 |
| 4 | 40.0 | 20.1 | 1.99 |
| 5 | 50.0 | 25.0 | 2.00 |
How to Apply the Process
Worked Example: Simple Read
Worked Example: Comparing Two Curves
Worked Example: Table Trend
| Depth (\(\text{m}\)) | Pressure (\(\text{atm}\)) | Temperature (\(^{\circ}\text{C}\)) | Dissolved \( \text{O}_2 \) (\(\text{mg/L}\)) |
|---|---|---|---|
| 0 | 1.0 | 22 | 8.5 |
| 10 | 2.0 | 18 | 7.2 |
| 20 | 3.0 | 14 | 6.1 |
| 30 | 4.0 | 10 | 5.0 |
| 40 | 5.0 | 7 | 4.3 |
Handling Multiple Variables
ACT passages often present figures with two or more curves or a dual y-axis. Here is how to handle them without confusion:
Scatter Plots and Correlation
Common Mistakes to Avoid
Summary: Diagram Reading Skills
| Skill | What to Do | Watch Out For |
|---|---|---|
| Read a single value | Trace from axis to curve to axis | Non-linear scales |
| Identify a trend | Look at overall slope direction | Local fluctuations vs. overall pattern |
| Compare two curves | Draw vertical line at same x-value | Different y-axis scales |
| Extrapolate | Extend the trend beyond data range | Trend may not continue |
| Spot an outlier | Find points far from the trend line | Outlier does not equal error |
Question 1 of 5
According to the graph, approximately what is the plant height when \( 60~\text{g} \) of fertilizer is applied?
Question 2 of 5
A scientist measured the population of bacteria in a petri dish every 2 hours. Results:
Hour 0: 100 | Hour 2: 200 | Hour 4: 410 | Hour 6: 790 | Hour 8: 1,600 | Hour 10: 3,150
Based on the data, the population growth is best described as:
Question 3 of 5
At which \(\text{pH}\) does Enzyme A achieve its maximum reaction rate, and what is the approximate rate?
Question 4 of 5
A student measures the distance a toy car travels on surfaces with different friction coefficients:
Surface A (smooth tile): \( 4.2~\text{m} \)
Surface B (carpet): \( 1.8~\text{m} \)
Surface C (sandpaper): \( 0.6~\text{m} \)
Surface D (waxed wood): \( 3.5~\text{m} \)
The car was released from the same height on a ramp for every trial.
Which conclusion is best supported by the data?
Question 5 of 5
If the trends continue, which statement is most likely true for 2025?